From: Rob Hopkins (rshopkins@xxxxxxxxxxxxx)
Date: Thu Apr 19 2001 - 20:19:36 GMT-3
works on my 2501...
System flash directory:
File Length Name/status
1 4022740 igs-in-l.110-22.bin
frame-relay switching
interface Serial0
no ip address
encapsulation frame-relay
no fair-queue
frame-relay route 100 interface Tunnel100 100
frame-relay route 300 interface Tunnel100 200
!
----- Original Message -----
From: "Johnny Dedon" <johnny.dedon@exodus.net>
To: "Carl Phelan" <carlphelan@hotmail.com>; <ccielab@groupstudy.com>
Sent: Thursday, April 19, 2001 6:54 PM
Subject: Re: Frame Relay Switch with 2 Routers
> Carl,
> I haven't read this document but I don't think there is a way to do
> frame-relay switching over anything but a serial connection.
> Johnny
> ----- Original Message -----
> From: "Carl Phelan" <carlphelan@hotmail.com>
> To: <ccielab@groupstudy.com>
> Sent: Thursday, April 19, 2001 5:40 PM
> Subject: Frame Relay Switch with 2 Routers
>
>
> > Hi,
> >
> > I am following the document from CCprep to create a frame relay switch
> from
> > two 2501s. When I come to enter the following command:
> > 'frame-relay route 501 interface t0 105'
> > in interface mode on Serial 1, the router reports an error in the
command
> > syntax with 't' or even the full word 'tunnel'. When I replace 't0'
with
> a ?
> > the response is that it only expects the word 'serial'.
> > I have tried IOS ver 11.1, 11.2 and 12.0 with the same problem on
> different
> > routers - anybody have any ideas?
> >
> > Thanks.
> > **Please read:http://www.groupstudy.com/list/posting.html
> **Please read:http://www.groupstudy.com/list/posting.html
**Please read:http://www.groupstudy.com/list/posting.html
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:29:52 GMT-3