From: Johnny Dedon (johnny.dedon@xxxxxxxxxx)
Date: Thu Apr 19 2001 - 19:54:50 GMT-3
Carl,
I haven't read this document but I don't think there is a way to do
frame-relay switching over anything but a serial connection.
Johnny
----- Original Message -----
From: "Carl Phelan" <carlphelan@hotmail.com>
To: <ccielab@groupstudy.com>
Sent: Thursday, April 19, 2001 5:40 PM
Subject: Frame Relay Switch with 2 Routers
> Hi,
>
> I am following the document from CCprep to create a frame relay switch
from
> two 2501s. When I come to enter the following command:
> 'frame-relay route 501 interface t0 105'
> in interface mode on Serial 1, the router reports an error in the command
> syntax with 't' or even the full word 'tunnel'. When I replace 't0' with
a ?
> the response is that it only expects the word 'serial'.
> I have tried IOS ver 11.1, 11.2 and 12.0 with the same problem on
different
> routers - anybody have any ideas?
>
> Thanks.
> **Please read:http://www.groupstudy.com/list/posting.html
**Please read:http://www.groupstudy.com/list/posting.html
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:29:51 GMT-3