From: Huang HaiBo (huanghb@xxxxxxxxxxx)
Date: Thu Apr 19 2001 - 06:11:44 GMT-3
I don't think it is correct to use the set ip permit to bundle the ip addres
s to mac address.
In fact, this question mean is only the Laptop that have this mac address an
d this ip address can access network through cat 5000.
hhb
----- Original Message -----
From: Clifton Stewart <cliftonlstewart@home.com>
To: Huang HaiBo <huanghb@mdcl.com.cn>; <ccielab@groupstudy.com>
Sent: Thursday, April 19, 2001 4:44 PM
Subject: Catlyst 5000
> Huang,
>
> Try setting the port security for the mac-address. This is actually useful to
prevent using from plugging hosts into incorrect VLANs, causing a troubleshoot
ing nightmare.
>
> http://www.cisco.com/univercd/cc/td/doc/product/lan/cat5000/rel_5_4/cmd_ref/s
et_po_r.htm#16989
>
> http://www.cisco.com/univercd/cc/td/doc/product/lan/cat5000/rel_5_4/cmd_ref/s
h_a_c.htm#18219
>
> Then use the set ip permit command to specify a particular ip address.
>
> http://www.cisco.com/univercd/cc/td/doc/product/lan/cat5000/rel_5_4/cmd_ref/s
et_f_l.htm#10190
>
> http://www.cisco.com/univercd/cc/td/doc/product/lan/cat5000/rel_5_4/cmd_ref/s
h_l_mi.htm#41202
>
> -Cliff
>
>
>
> Huang HaiBo wrote:
>
> > Hi,
> >
> > I have one question about the catalyst 5000:
> >
> > There is one port 2/10 in the catalyst 5000 as drop point, only let a La
ptop to use the drop, only permit MAC=00-12-34-56-78-22 and IP address 10.10.10
.10 to access this drop point.
> >
> > I think Cat5000 is layer 2 equipment, how to make it to the lay3 ip addr
ess?
> >
> > HHB
> > **Please read:http://www.groupstudy.com/list/posting.html
**Please read:http://www.groupstudy.com/list/posting.html
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:29:50 GMT-3