From: Rob Hopkins (rshopkins@xxxxxxxxxxxxx)
Date: Thu Apr 19 2001 - 01:25:02 GMT-3
actually you dont need modems, like Brian said rollover cable back to
back..
----- Original Message -----
From: "Leah Lynch" <leah_lynch@lucent.com>
To: "'Maness, Drew'" <drew.maness@veritect.com>; "'Brian Dennis'"
<brian@5g.net>; "'Mohamed Heeba'" <MAHeeba@itqan.co.ae>;
<ccielab@groupstudy.com>
Sent: Wednesday, April 18, 2001 4:02 PM
Subject: RE: Aux back to back
> To use the Aux port you need modems, you use the rollover cable and the
> modem adapters, the you configured line aux 0 with the speed, flow
control,
> etc.
>
> Leah
>
> -----Original Message-----
> From: nobody@groupstudy.com [mailto:nobody@groupstudy.com]On Behalf Of
> Maness, Drew
> Sent: Friday, April 13, 2001 8:51 AM
> To: 'Brian Dennis'; Mohamed Heeba; ccielab@groupstudy.com
> Subject: RE: Aux back to back
>
>
> If you want to get routing information across the link use the async
default
> route command. OSPF will treat the aux interface as passive.
>
> Other than that it works great. I was and am short a serial interface. I
> used the aux port and it worked great.
>
> -----Original Message-----
> From: Brian Dennis [mailto:brian@5g.net]
> Sent: Friday, April 13, 2001 2:07 AM
> To: Mohamed Heeba; ccielab@groupstudy.com
> Subject: RE: Aux back to back
>
>
> All you need is a standard console (rolled) cable to go back to back.
>
> http://www.cisco.com/warp/public/793/access_dial/auxback.html
>
> Brian Dennis
> CCIE #2210 (R&S)(ISP/Dial)
> CCSI #98640
>
> -----Original Message-----
> From: nobody@groupstudy.com [mailto:nobody@groupstudy.com]On Behalf Of
> Mohamed Heeba
> Sent: Friday, April 13, 2001 1:15 AM
> To: 'ccielab@groupstudy.com'
> Subject: Aux back to back
>
>
> guys
> is there anyway to connect the Aux or the routers back to back ?
> im running out or ports and looking to utilize this
> wat kind of cable i need and if there is any tips in the config ???
> thx
> **Please read:http://www.groupstudy.com/list/posting.html
**Please read:http://www.groupstudy.com/list/posting.html
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:29:50 GMT-3