From: David Anderson (dma@xxxxxxxxx)
Date: Wed Apr 18 2001 - 01:05:17 GMT-3
This is a very good explanation of bandwidth allocation using custom
queuing. Specifically how to figure out what your byte count should be for
each percentage.
http://www-tac.cisco.com/Support_Library/Internetworking/IBM_Info/DLSw+/design_
guide/dlsw_dg_chap5.htm
At 11:00 AM 4/18/2001 +0800, Huang HaiBo wrote:
> Hi, all
>
> I have a question:
>
> How to location bandwidth in the serial 0, dlsw 50%, ip 25%, ipx 25%.
> And dlsw mixed size 512 bytes, ipx mixed size 1024 bytes, ip mixed size
> 256 bytes.
>
> could I do like this:
>
> queue-list 1 protocol 1 tcp 2065
> queue-list 1 protocol 1 tcp 2067
> queue-list 1 protocol 1 ipx 2
> queue-list 1 protocol 1 ip 3
> queue-list 1 queue 1 byte-count 2048
> queue-list 1 queue 2 byte-count 1024
> queue-list 1 queue 3 byte-count 1024
>
> question is: Do I need default queue? DLSW can indicate like this?
>
> Huang
>**Please read:http://www.groupstudy.com/list/posting.html
David Anderson
Network Design Engineer
Enterprise Solutions Architecture & Design
(408) 853-5515
dma@cisco.com
| |
..:|||||||:...:|||||||:..
C I S C O S Y S T E M S
**Please read:http://www.groupstudy.com/list/posting.html
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:29:48 GMT-3