From: . .. (subinterface@xxxxxxxxx)
Date: Tue Apr 17 2001 - 23:13:23 GMT-3
What you have to do is create the TRBRF first. This
is the Bridge. Then you create the TRCRF(s) which
are the rings. You must assign each TRCRF (Ring) to
the single TRBRF (Bridge). The TRBRF is the parent.
Then you assign the ports to the TRCRF (rings). On a
Catalyst 3920, this is done through a series of menus.
On a Catalyst 5K, use the set command. Good luck.
--- Ramesh Ramasamy <ramesh_ramasamy@hotmail.com>
wrote:
> Hi Everyone,
>
> With these questions-you can see - am not a TR -
> aware guy...
>
> Could someone help me with a quick note on the
> parent/child ... of
> TRCRF/TRBRF?. Did go throu the links/docs - to be
> honest - not fully..
>
> For corrections if am wrong: TRCRF - the ports that
> belong to same ring.
> TRBRF - collection of different ring#?
>
> Thanks,
> Ramesh.
>
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:29:48 GMT-3