From: Glen Lavers (glavers@xxxxxxxxx)
Date: Tue Apr 17 2001 - 16:14:12 GMT-3
You can place a secondary address with a /25 on the serial int, it should
then advertise both /24 and /25 addresses. Give it a try, I know I've used
this technique the otherway around for making a poorly addressed VLSM to
FLSM topo work.
Cheers,
Glen
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com]On Behalf Of
Wang, Roger
Sent: Tuesday, April 17, 2001 8:22 PM
To: 'ccielab@groupstudy.com'
Subject: IGRP route advertisement
Hi, all,
I have searched high and low in the archive and can't seem to find anything
about it...
I have a question about IGRP route advertisement. We all know that the
advertisements from IGRP are only with the mask of the interface:
172.16.77.4/25--e0(R4)s0--172.16.66.4/24
R4 is running IGRP. Is there way so that the /25 subnet (e0) can be
advertised out interface s0 (on /24 subnet)? The other end of s0 is a
router running both IGRP and OSPF where redistribution occurs.
Thanks,
Rog
**Please read:http://www.groupstudy.com/list/posting.html
**Please read:http://www.groupstudy.com/list/posting.html
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:29:48 GMT-3