From: David Anderson (dma@xxxxxxxxx)
Date: Tue Apr 17 2001 - 12:46:03 GMT-3
I have set it up over frame with the hub having sub-interfaces and the
spokes having physical interfaces. I did not have any problems getting it
to work. Just remember DLSW connects over TCP, so as long as your routing
protocol is working correctly, you should be able to get it working.
HTH,
David
At 10:00 AM 4/17/2001 +0100, you wrote:
>Has anyone seen something similar to this: DLSw+ over frame does not work if
>the 2 ends do not match in interface type. So if I have one interface as
>physical & the other is suinterface DLSw does NOT work but if both ends are
>physical then itis ok
>
>Many thanks & regards.
>
>Tariq Sharif
>
>[GroupStudy.com removed an attachment of type application/ms-tnef which
>had a name of winmail.dat]
>**Please read:http://www.groupstudy.com/list/posting.html
David Anderson
Network Design Engineer
Enterprise Solutions Architecture & Design
(408) 853-5515
dma@cisco.com
| |
..:|||||||:...:|||||||:..
C I S C O S Y S T E M S
**Please read:http://www.groupstudy.com/list/posting.html
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:29:47 GMT-3