From: Keith Leonard (Keith_Leonard@xxxxxxxxxxxx)
Date: Sun Apr 15 2001 - 23:07:03 GMT-3
Hi All,
I have a very basic question on how IRDP is supposed to work. The Doco CD
explains clearly enough how to configure this (not much to it) but doesn't
give any examples or clearly explain what the result should be.
Take the following scenario..............
R1, R2 and R3 share the same ethernet segment.....
R1:
Interface ethernet 0
ip address 10.1.1.1 255.0.0.0
ip irdp
ip irdp maxadvertinterval 10
ip irdp minadvertinterval 5
ip irdp preference 150
R2:
Interface ethernet 0
ip address 10.1.1.2 255.0.0.0
ip irdp
ip irdp maxadvertinterval 10
ip irdp minadvertinterval 5
ip irdp preference 100
R3:
Interface ethernet 0
ip address 10.1.1.3 255.0.0.0
What should happen here? Should R3 see a default gateway? Should IP Routing
be disabled on R3, as if using proxy arp?
R3 is seeing the advertisements coming from R1 and R2, but that's all.
I'm probably missing some major point with this. Can anyone explain to me
what's happening here
Also, do the switches support IRDP, so as they can have some redundancy
with regards default gateways?
Thanks,
Keith
**********Confidentiality/Limited Liability Statement***************
This message contains privileged and confidential information intended only
for the use of the addressee named above. If you are not the intended
recipient of this message, you must not disseminate, copy or take any
action in reliance on it. If you have received this message in error,
please notify Data#3 immediately. Any views expressed in this message are
those of the individual sender and Data#3 accepts no liability for the
content of this message except where the sender specifically states them to
be the views of Data#3.
**Please read:http://www.groupstudy.com/list/posting.html
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:29:46 GMT-3