From: Roger, Michael (Michael.Roger@xxxxxxxxxxxxx)
Date: Sat Apr 14 2001 - 11:14:47 GMT-3
In order to use it as a "ATM Switch" you need a 5500 with the 13 slots...The
ASP would go in slot 13 and the other modules in the 4 slots above it. You
can put an entire LS1010 in the bottom 5 slots of the Cat 5500. The 5000
will support ATM modules, but not the ASP...
Here are some links from cisco:
http://www.cisco.com/univercd/cc/td/doc/product/lan/cat5000/cnfg_nts/5012atm
.htm
http://www.cisco.com/univercd/cc/td/doc/product/lan/cat5000/hardware/modules
/06atm.htm
Michael Roger
Team Manager- LAN Switching
michael.roger@getronics.com
phone 713-394-1595
This e-mail message and any attachments are confidential and may be
privileged. If you are not the intended recipient, please notify me
immediately by replying to this message and please destroy all copies of
this message and attachments. Thank you.
-----Original Message-----
From: Bruce Williams [mailto:bruce@williamsnetworking.com]
Sent: Friday, April 13, 2001 5:23 PM
To: Ccielab@Groupstudy. Com
Subject: CAT 5000 used for ATM Switch in Home Lab
Is it possible to use an Catalyst 5000 as an ATM Switch with the appropriate
modules installed. If so, what modules are necessary?
Bruce Williams
194 Henderson Avenue
Gulph Mills, PA 19428
215-275-2723 Mobile
610-397-0774 Home
[mailto:bruce@williamsnetworking.com]
[GroupStudy.com removed an attachment of type application/ms-tnef which had
a name of winmail.dat]
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:29:45 GMT-3