From: daneyon hansen (daneyonhansen@xxxxxxxxxxx)
Date: Fri Apr 13 2001 - 07:07:28 GMT-3
I seem to be able to copy .bin or -config from tftp to my router, but if I
try and copy from router to tftp I am unable to copy source confg(R9) to
tftp(R2)? Am I misunderstanding Cisco auto install docs which say to create
your config on the soon to be auto install router and copy it to tftp, clear
the config reboot and have it pull it's config via setup from tftp router?
R2------Ether(10.0.92.X/24)-------R9
Here it is:
r9#copy start tftp
Address or name of remote host []? 10.0.92.2
Destination filename [r9-confg]? r9-config
.....
%Error opening tftp://10.0.92.2/r9-config (Undefined error)
r9#
r9#copy start tftp
Address or name of remote host []? 10.0.92.2
Destination filename [r9-confg]? nvram:r9-config
.....
%Error opening tftp://10.0.92.2/nvram:r9-config (Undefined error)
TFTP ROUTER Config:
tftp-server flash:c2600-js56i-mz.121-5.T.bin
tftp-server nvram:r9-config
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:29:45 GMT-3