From: Padhu (LFG) (padhu@xxxxxxxxxxxx)
Date: Wed Apr 11 2001 - 13:23:02 GMT-3
you could try copy tftp flash and then run tftp server locally on the pc
connected to the console and copy flash tftp to view it.
-----Original Message-----
From: Curtis Call [mailto:curtiscall@home.com]
Sent: Wednesday, April 11, 2001 9:57 AM
To: xander
Cc: ccielab@groupstudy.com
Subject: Re: Saving extra configs on a 2500
Hmm....well I was hoping for a different answer, but I guess I should have
been expecting this :-)
At 02:20 AM 4/11/01, you wrote:
>Hello Curtis,
>
>If someone would tell you, that it is impossible, do not belive
>him!!!!
>
>IT IS REALLY POSSIBLE!!!
>
>Router2501#write brain
>Building configuration...
>[OK]
>
>YOU NEED TO STORE IT IN YOUR BRAIN! :-)))
>
>CC> I'm just curious if there is a trick available to save an extra config
>CC> (other than startup-config) somewhere on a 2500. Given that the flash
is
>CC> read-only I can't put it there like I would on other routers. My only
>CC> thought is I could put it in NVRAM but I can't seem to find a way to do
>CC> that either. Any ideas or is this just not going to happen?
>
>CC> Thanks.
>--
> WBW, xander
> mailto:xander@adt.ru
> CCNA, CCNP+VoiceAccess, CCIE very soon :-)
>
>...
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:29:44 GMT-3