From: michael martinek (mikemart@xxxxxxxxx)
Date: Wed Apr 11 2001 - 02:43:02 GMT-3
Larry,
The WIC-2T is not supported in the 10 meg ethernet Network Modules for
the 3600. It is supported in the FE based Network Modules (i.e 1FE2W, 2FE2W)
The NM-2W module does support this WIC in the 3600. The WIC-2T is also
supported on the on board WIC slots in the 2600 and the 1700.
HTH.
Mike
At 09:34 PM 04/10/2001 -0700, Larry Roberts wrote:
>Hello all,
>
>I was wondering if anyone can help me with this issue or clarify it for me. I
>have a 3640 with the 2 ethernet 2 WAN module. For some reason it doesn't
>recognize my WIC-2T cards. I know at work I have a 3640 with a Fast Ethernet 2
>WAN module that has WIC-2T cards in it. So, I guess the question is, does the
>2 Ethernet 2 WAN module support the WIC-2T card or do I need a Fast Ethernet 2
>WAN module. Also, does the 1600 series support the WIC-2T? I don't think it
>does.
>
>TIA,
>
>Larry R
-----------------------------------------------------------------------------
Cisco Systems Mike Martinek
Systems Engineer
| | 7900 International Drive
||| ||| Suite 400
||||| ||||| Bloomington, MN 55425
||||||||| ||||||||| Voice.......952-967-8512
||||||||||||| ||||||||||||| Fax..........952-967-8311
|||||||||||||||||||||||||||||||||||||||||| Email - mikemart@cisco.com
"EMPOWERING THE INTERNET GENERATION"
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:29:43 GMT-3