Redistributing OSPF into RIPv2

From: Daniel C. Young (danyoung99@xxxxxxxxxxxx)
Date: Tue Apr 10 2001 - 01:17:11 GMT-3

• Next message: Kevin Mahler: "RE: D-Days....@ RTP"
• Previous message: Henrique Issamu Terada: "RE: OSPF/IGRP fatkid lab"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

   
Group,

When redistributing OSPF into RIPv2, I noticed that by default metric is set
to 16 (unreachable).
02:10:36: RIP: sending v2 update to 224.0.0.9 via Serial1 (10.21.1.1)
02:10:36: 10.3.0.0/16 -> 0.0.0.0, metric 16, tag 0
02:10:36: 10.6.0.0/16 -> 0.0.0.0, metric 16, tag 0
02:10:36: 10.33.0.0/17 -> 0.0.0.0, metric 16, tag 0
02:10:36: 10.100.0.0/16 -> 0.0.0.0, metric 16, tag 0

Now when I use RIPv1, redistribution occurs no problem and the metrics
reflect actual hop count. Of course, I can manipulate this with:
'redistribute rip metric 2' under 'router ospf' but I'd like to know whether
this is expected behavior. Has anyone else experienced this? I've searched
Doyle and CCO without success.

Thanks in advance,

Daniel Young
Sr. Network Engineer
Internet Data Center
SBC Service Inc. - ITO

(949) 221-1928 Office
(714) 350-8945 Cell
ICQ# 109846891

• Next message: Kevin Mahler: "RE: D-Days....@ RTP"
• Previous message: Henrique Issamu Terada: "RE: OSPF/IGRP fatkid lab"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:29:43 GMT-3