From: David Fahed (dfahed@xxxxxx)
Date: Fri Apr 06 2001 - 12:24:38 GMT-3
Is it possible to suppress an AS number in a AS path?
Thanks in advance.
Peter Simmons wrote:
> David,
>
> If your IOS is pre-11.3(something) or 12.0, you might want to configure the
> "standby use-bia" interface command. This can resolve some odd problems in
> SRB environments, as well as making it a little simpler in complex HSRP
> setups. It should default to this in "newer" releases.
>
> The use-bia command causes gratuitous arp's to be sent when failover occurs,
> so if anything doesn't understand these in a locally connected network, you
> might have issues when the standby takes over, but apart from that, it
> should be OK.
>
> You may want to search CCO for "standby use-bia" to get some more info, and
> it might be worth doing a search on CCO Bugwatch for HSRP with your IOS
> release, as there are some generally weird bugs for HSRP anyway, (like
> standby track not always working etc.) that you might want to test out -
> These aren't TR specific however.
>
> Hope this helps, remember YMMV!
>
> Regards
>
> Pete S.
>
> -----Original Message-----
> From: David Anderson <dma@cisco.com>
> To: ccielab@groupstudy.com <ccielab@groupstudy.com>
> Date: 31 March 2001 21:24
> Subject: HSRP for TokenRing
>
> >Can anyone tell me if there are any special needs in configuring HSRP for
> >Token Ring. Do you have to pay special attention to the MAC addresses?
> >Thanks,
> >David
> **NOTE** All LAB SWAP messages should now be sent to the
> LAB SWAP Message board on groupstudy.com.
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:29:41 GMT-3