From: Tom Thomas (tothomas@xxxxxxxxxxxx)
Date: Thu Apr 05 2001 - 23:45:44 GMT-3
Tell you what Matt, try to figure this out first....
Configure the appropriate Access Control List (ACL) to permit or deny the
following networks on an inbound interface
Deny network 204.199.104.X
Deny network 164.199.104.X
Permit network 204.199.108.X
Permit network 164.199.108.X
Permit all other networks that are in the range 140.140.X.Y where X is the
even numbered subnets only. Permit all other IP subnets. You must also
minimize the configuration as much as possible!
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com]On Behalf Of
Matt Harrison
Sent: Thursday, April 05, 2001 9:05 PM
To: ccielab@groupstudy.com
Subject: Odd/Even access-lists
I have found some info on this where you could allow odd/even host addresses
as well as Networks. Utilizing access-lists, but I have not found anything
that is all that clear.
I have never seen anything like this but I can imagine it showing up in a
lab.
Does anyone have any perspective or any clear explanation of this?
A good link would not hurt.
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:29:41 GMT-3