From: Edward J. Carley Jr. (ejc@xxxxxxxx)
Date: Wed Apr 04 2001 - 11:58:32 GMT-3
Folks
Actually you need what is termed a conditioning cable to enable
LX to run over MM; I think PN CAB-GELX-625=. Works fine. Reference
http://www.cisco.com/warp/customer/534/21.html
cheers
ejc
-----Original Message-----
From: Ron.Fuller@3x.com
Sent: Wed 4/4/2001 6:57 AM
To: Mohamed Heeba
Cc: 'ccielab@groupstudy.com'; 'cisco@groupstudy.com';
nobody@groupstudy.com
Subject: Re: Gigabit ethernet distance limitation (off topic )
Nope. I just tried this yesterday with a 4006 and a 6509 and no
go. The
Cisco reseller information states it will work with MM fiber,
but the GBIC
itself actually says 1300nm fiber (SM). Here is a URL that has
the info
you are looking for. (See the bottom of the chart) This URL
makes it seem
like there are two LX/LH GBICs available, but I only have a part
number
for one.
http://www.cisco.com/warp/public/cc/pd/si/casi/ca6000/prodlit/c60ge_ds.h
tm
HTH!
Ron Fuller, CCIE #5851, CCDP, CCNP-ATM, CCNP-Security,
CCNP-Voice, MCNE
3X Corporation
rfuller@3x.com
Mohamed Heeba <MAHeeba@itqan.co.ae>
Sent by: nobody@groupstudy.com
04/04/2001 06:30 AM
Please respond to Mohamed Heeba
To: "'ccielab@groupstudy.com'"
<ccielab@groupstudy.com>
cc: "'cisco@groupstudy.com'" <cisco@groupstudy.com>
Subject: Gigabit ethernet distance limitation
(off topic )
hi guys
anyone know if the LX modules can run over MM fiber ?
where can i get the distance limitation for this
thx
abuse@groupstudy.com
[demime 0.98b removed an attachment of type application/ms-tnef which had a nam
e of winmail.dat]
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:29:40 GMT-3