From: Guy Farber (gfarber@xxxxxxxxx)
Date: Wed Apr 04 2001 - 06:56:30 GMT-3
Guys,
I have a very simple FR network. One router functions at the FR switch and 2
others have a pvc between them. When I run OSPF over the FR link without
changing any OSPF interface parameters and using in-arp, hellos are not
being sent from the routers. If I change the interface type to broadcast,
they start exchanging hellos and finally build an adjacency. Now for the
interesting part, if I put a neighbor statement on one of them they start
exchanging hellos and become neighbors. If I remove the neighbor statement
it stays the same.
I'm using 2621 and 3640 with ver 12.1(4)
What am I missing here?
-------------------------------------------------
Guy Farber
Systems Engineer
Tel: +972 (9) 970-0363
Fax: +972 (9) 970-0019
GSM: +972 (54) 975-363
Email: gfarber@cisco.com
Cisco Systems Israel
85 Medinat Hayehudim St.
46766 Herzliya
ISRAEL
-------------------------------------------------
"Programming today is a race between software engineers striving to build
bigger and better idiot-proof programs, and the Universe trying to produce
bigger and better idiots. So far, the Universe is winning."
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:29:40 GMT-3