From: sunny6392 (sunny6392@xxxxxxxx)
Date: Wed Apr 04 2001 - 04:53:52 GMT-3
Redistribute betwwen igrp and ospf question:
Hi All:
R1 ,r3,r4 is on framerelay and ospf area 0,r3 ,r2,r6 on area 3 ,R3 is ABR of ar
ea 0 and area 3.
R2 connect to r5 through ethernet and running IGRP, R2 is ASBR, and redistrbu
te between OSPF AND IGRP.
In ospf area 0 have /24 ,/32, /27 and /26 routes(ex:130.6.20.0/192,130.6.1.1/32
,130.6.134.0/27 and 130.6.4.0/24)
ospf area 3 have only /24 routes( EX:130.6.70.0/24,130.6.32.0/24)
Between r2 and r5 is /28 subnet which is the same major network as ospf,ex:130.
6.25.0/28
On R3, I use area 0 range and area 3 range under router ospf 1 to have the ospf
domain routes to have /28 mask.
But on R5,I can only see ospf area 0 routes,no routes ospf area 3, why?
The only way is to add static routes destinating to area 3 routes to point to N
ULL0 ON R2, And redistribute static into igrp on R2 ? Is that right? but If s
tatic routes is not permit ,how are about to do?
Any reply is wellcome.Thanks.
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:29:40 GMT-3