ISDN backup problem, not working correctly

From: Corey M. Ellis (corey.m.ellis@xxxxxxxx)
Date: Tue Apr 03 2001 - 18:20:26 GMT-3


   
Hi everyone,

I have been working on a ISDN backup scenario, where IPX can traverse the
ISDN line at all time, and IP only when the frame interface goes down. This
scenario has to use Dialer profiles because of requirements. I have
configured what I feel to be a correct configuration using dialer watch, and
snapshot for IPX.

Any way my IPX dialer interface is fine, I can ping and everything. But my
IP dialer interface can't ping the remote side of the ISDN link. I see
where the dialer binds to the bri interface but when I do a debug ip packet
I get encapsulation failed. Both sides are using ppp so I don't understand
where the encapsulation failed is pointing to. I am posting my configs.
Any help will be appreciated. The routers are r5 (Called router) and r6
(Calling router). The primary line is the Serial 0 subinterfaces on both
routers r6 is p-to-p and r5 is multipoint. if this goes down it should
bring up the ISDN line for IP.

Thanks in advance

This is the CALLED Router!!!!

Building configuration...

Current configuration:
!
version 12.1
service timestamps debug uptime
service timestamps log uptime
no service password-encryption
!
hostname r5
!
!
username non-ip password 0 cisco
username backup password 0 cisco
username r6 password 0 cisco
!
!
!
!
ip subnet-zero
no ip domain-lookup
!
ipx routing 0005.0005.0005
isdn switch-type basic-ni
cns event-service server
!
!
!
!
!
interface Ethernet0
 ip address 172.16.195.5 255.255.255.0
!
interface Serial0
 no ip address
 encapsulation frame-relay
 no fair-queue
 frame-relay lmi-type ansi
!
interface Serial0.125 multipoint
 ip address 172.16.125.5 255.255.255.0
 ip ospf message-digest-key 1 md5 cisco
 ip ospf network point-to-multipoint
 ipx network 654
 no ipx split-horizon eigrp 1
 frame-relay map ipx 654.0004.0004.0004 103 broadcast
 frame-relay map ipx 654.0006.0006.0006 102 broadcast
 frame-relay map ip 172.16.125.4 103 broadcast
 frame-relay map ip 172.16.125.6 102 broadcast
!
interface Serial0.140 point-to-point
 ip address 172.16.140.5 255.255.255.0
 ipx network 5588
 frame-relay interface-dlci 104
!
interface Serial1
 no ip address
 shutdown
!
interface Serial2
 no ip address
 shutdown
!
interface Serial3
 no ip address
 shutdown
!
interface BRI0
 no ip address
 encapsulation ppp
 shutdown
 dialer pool-member 1
 isdn switch-type basic-ni
 isdn spid1 3840200001 384020
 isdn spid2 3840200002 384030
 ppp authentication chap
!
interface Dialer0
 description ip dialer interface
 ip address 172.16.15.5 255.255.255.0
 encapsulation ppp
 dialer remote-name backup
 dialer idle-timeout 30
 dialer max-call 4096
 dialer-group 1
 ppp authentication chap
 ppp chap password 7 104D000A0618
!
interface Dialer1
 description ipx dialer interface
 no ip address
 encapsulation ppp
 dialer remote-name non-ip
 dialer pool 1
 dialer idle-timeout 30
 dialer max-call 4096
 dialer-group 2
 ipx network AAA
 snapshot server 5
 ppp authentication chap
 ppp chap password 7 00071A150754
!
router ospf 1
 redistribute rip metric-type 1 subnets
 network 172.16.15.0 0.0.0.255 area 0
 network 172.16.125.5 0.0.0.0 area 0
!
router rip
 version 1
 redistribute ospf 1 metric 2
 passive-interface BRI0
 passive-interface Ethernet0
 passive-interface Serial0.125
 network 172.16.0.0
 default-information originate
!
router bgp 100
 no synchronization
 neighbor 172.16.125.6 remote-as 200
 neighbor 172.16.140.8 remote-as 100
 neighbor 172.16.140.8 next-hop-self
!
no ip classless
no ip http server
!
dialer-list 1 protocol ip permit
dialer-list 2 protocol ipx permit
!
!
!
ipx router eigrp 1
 network 654
!
!
ipx router rip
 no network 654
!
!
!
tftp-server flash:c2500-jos56i-l_121-1.bin
!
line con 0
 exec-timeout 0 0
 logging synchronous
 transport input none
line aux 0
line vty 0 4
 login
!
end

###########CALLING ROUTER############

Building configuration...

Current configuration:
!
version 12.1
service timestamps debug uptime
service timestamps log uptime
no service password-encryption
!
hostname r6
!
!
username r5 password 0 cisco
!
!
!
!
ip subnet-zero
no ip domain-lookup
!
ipx routing 0006.0006.0006
isdn switch-type basic-ni
cns event-service server
!
!
interface Loopback0
 ip address 172.16.75.1 255.255.255.252
 ipx network 6600
!
interface Loopback1
 ip address 172.16.75.5 255.255.255.252
 ipx network 6601
!
interface Loopback2
 ip address 172.16.75.9 255.255.255.252
!
interface Loopback3
 ip address 147.10.1.145 255.255.255.224
!
interface Serial0
 no ip address
 encapsulation frame-relay
 frame-relay lmi-type ansi
!
interface Serial0.125 point-to-point
 ip address 172.16.125.6 255.255.255.0
 ip ospf message-digest-key 1 md5 cisco
 ip ospf network point-to-multipoint
 ipx network 654
 frame-relay interface-dlci 201
!
interface Serial1
 no ip address
 shutdown
!
interface Serial2
 no ip address
 shutdown
!
interface Serial3
 no ip address
 shutdown
!
interface TokenRing0
 ip address 140.10.1.1 255.255.255.0
 ring-speed 16
!
interface BRI0
 no ip address
 encapsulation ppp
 no ip mroute-cache
 shutdown
 dialer pool-member 1
 isdn switch-type basic-ni
 isdn spid1 3840000001 384000
 isdn spid2 3840000002 384010
 no fair-queue
 ppp authentication chap
!
interface Dialer0
 ip address 172.16.15.6 255.255.255.0
 encapsulation ppp
 ip ospf demand-circuit
 dialer remote-name r5
 dialer pool 1
 dialer watch-disable 20
 dialer string 384020 class ISDN
 dialer load-threshold 1 outbound
 dialer max-call 4096
 dialer watch-group 1
 dialer-group 1
 ppp authentication chap
 ppp chap hostname backup
 ppp chap password 7 02050D480809
!
interface Dialer1
 no ip address
 encapsulation ppp
 dialer remote-name r5-ipx
 dialer pool 1
 dialer idle-timeout 30
 dialer string 384030
 dialer max-call 4096
 dialer-group 2
 ipx network AAA
 snapshot client 5 15 dialer
 ppp authentication chap
 ppp chap hostname non-ip
 ppp chap password 7 1511021F0725
!
router ospf 1
 area 2 range 172.16.75.0 255.255.255.224
 network 172.16.15.0 0.0.0.255 area 0
 network 172.16.75.0 0.0.0.255 area 2
 network 172.16.125.6 0.0.0.0 area 0
!
router bgp 200
 network 147.10.1.128 mask 255.255.255.224
 neighbor 172.16.125.5 remote-as 100
!
no ip classless
no ip http server
!
!
map-class dialer ISDN
 dialer idle-timeout 30
dialer watch-list 1 ip 172.16.125.0 255.255.255.0
dialer-list 1 protocol ip permit
dialer-list 2 protocol ipx permit
!
!
!
ipx router eigrp 1
 network 654
!
!
ipx router rip
 no network 654
!
!
!
!
line con 0
 exec-timeout 0 0
 logging synchronous
 transport input none
line aux 0
line vty 0 4
 exec-timeout 0 0
 login
!
end



This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:29:39 GMT-3