Re: CHAP callin problem

From: Jason1 (jason1@xxxxxxxxxx)
Date: Tue Apr 03 2001 - 15:03:20 GMT-3


   
With CHAP, the "called" router will sent the challenge, the "calling" router
will return the password hashed with the challenge.

----- Original Message -----
From: "tom cheung" <tkc9789@hotmail.com>
To: <mgaspard@cisco.com>
Cc: <ccielab@groupstudy.com>
Sent: Wednesday, April 04, 2001 1:40 AM
Subject: Re: CHAP callin problem

> Mike,
> That's how I interpret this command. But according to the debug, the
router
> I configured certainly did not behave like it suppose to.
>
>
> >From: Michel GASPARD <mgaspard@cisco.com>
> >To: tom cheung <tkc9789@hotmail.com>
> >CC: ccielab@groupstudy.com
> >Subject: Re: CHAP callin problem
> >Date: Tue, 03 Apr 2001 19:35:20 +0200
> >
> >Tom,
> >
> >According to
>
>http://www.cisco.com/univercd/cc/td/doc/product/software/ios120/12cgcr/dial
_r/drprt2/drppp.htm#xtocid1896063
> >
> >"
> >callin (Optional) Specifies authentication on incoming (received)
> >calls only.
> >"
> >
> >Does it match?
> >
> >Regards,
> >
> >Michel
> >
> >tom cheung wrote:
> > >
> > > Group,
> > > I'm testing with PPP authen chap callin and was unable to get it to
> >work.
> > > I'm under the impression that with this command, the calling router
will
> >not
> > > send a challenge to the called router. And authentication is done by
the
> > > called router. But it is not behaving that way. Is my understanding
how
> > > "callin" works incorrect?
> > >
> > > Here's config for the calling router:
> > > interface BRI0
> > > no ip address
> > > no ip directed-broadcast
> > > encapsulation ppp
> > > dialer pool-member 1
> > > isdn switch-type basic-ni
> > > isdn spid1 xxxxxxxxxxxxxx
> > > isdn spid2 yyyyyyyyyyyyyy
> > > ppp authentication chap callin
> > > ppp multilink
> > > !
> > > interface Dialer1
> > > ip address 152.3.65.2 255.255.255.252
> > > no ip directed-broadcast
> > > encapsulation ppp
> > > dialer remote-name r5
> > > dialer idle-timeout 45
> > > dialer watch-disable 20
> > > dialer string xxxxxxxxxx
> > > dialer pool 1
> > > dialer watch-group 1
> > > dialer-group 1
> > > ppp authentication chap callin
> > > ppp multilink
> > >
> > > Debug output:
> > > 20:32:58: %LINK-3-UPDOWN: Interface BRI0:1, changed state to up
> > > 20:32:58: %DIALER-6-BIND: Interface BR0:1 bound to profile Di1
> > > 20:32:58: %ISDN-6-CONNECT: Interface BRI0:1 is now connected to
> >8173142121
> > > 20:32:58: BR0:1 PPP: Treating connection as a callout
> > > 20:32:58: BR0:1 CHAP: Using hostname r6 from interface Di1
> > > 20:32:58: BR0:1 PPP: Phase is AUTHENTICATING, by the peer
> > > 20:32:58: BR0:1 CHAP: I CHALLENGE id 44 len 23 from "r5"
> > > 20:32:58: BR0:1 CHAP: Using hostname r6 from interface Di1
> > > 20:32:58: BR0:1 CHAP: O RESPONSE id 44 len 23 from "r6"
> > > 20:32:58: BR0:1 CHAP: I SUCCESS id 44 len 4
> > > 20:32:58: %DIALER-6-BIND: Interface Vi1 bound to profile Di1
> > > 20:32:58: %LINK-3-UPDOWN: Interface Virtual-Access1, changed state to
up



This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:29:39 GMT-3