From: Gabriel.Neagoe@xxxxxx
Date: Mon Apr 02 2001 - 12:20:18 GMT-3
Hello
I built myself an OSPF scenario as in attached GIF
<<ospf1.gif>>
(R1,R2,R3,R4 are connected through a frame relay switch, point-to-point
subinterfaces)
I have 2 problems:
1. network 192.168.1.0 does not appear in R2's routing table till I issue
"redistribute connected subnets" on R4
can anybody help me understand what's happening ?
(also 192.168.1.0 appears in R3's routing table with next-hop R2)
2. dashed line between r3 and r4 is a dial-up (async modems) line,
configured with "ip ospf demand-circuit"
after connecting the modems the "ping" works just fine, but no OSPF hellos
exchanged (of course because of this the routers keep dialing)
same question
-----------------------------------------------
Gabriel Neagoe, GN379-RIPE
Networking solutions consultant
Cisco Certified Network Professional
Cisco Certified Design Associate
S&T Romania
tel: +401 20 40 300
fax: +401 20 40 310
-----------------------------------------------
[demime 0.98b removed an attachment of type image/gif which had a name of ospf1
.gif]
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:29:38 GMT-3