Can't get OSPF Point-to-Multipoint out of EXSTART

From: Ronald Ramcharran (RonaldR@xxxxxxxxxxxxx)
Date: Sun Apr 01 2001 - 19:04:38 GMT-3

• Next message: Cox, Bryan: "RE: OSPF area 0 VLSM summarization"
• Previous message: Calkins Bob: "RE: OSPF pinging loopback address"
• Next in thread: Ronald Ramcharran: "Re: Can't get OSPF Point-to-Multipoint out of EXSTART"
• Maybe reply: Ronald Ramcharran: "Re: Can't get OSPF Point-to-Multipoint out of EXSTART"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

   
I cant seems to get this going.

Here is the relevant part of each router config.

R2
interface Serial0
 no ip address
 no ip directed-broadcast
 encapsulation frame-relay
 no ip mroute-cache
 cdp enable
!
interface Serial0.1 point-to-point
 ip address 150.100.32.2 255.255.224.0
 no ip directed-broadcast
 ip ospf network point-to-multipoint
 ip ospf priority 0
 frame-relay interface-dlci 203

ROUTER-2#sh fram map
Serial0.2 (up): point-to-point dlci, dlci 201(0xC9,0x3090), broadcast
          status defined, active
Serial0.1 (up): point-to-point dlci, dlci 203(0xCB,0x30B0), broadcast
          status defined, active
ROUTER-2#sh ip os n

Neighbor ID Pri State Dead Time Address Interface
172.168.10.65 100 EXSTART/ - 00:01:35 150.100.32.10 Serial0.1
ROUTER-2#

R4
interface Serial0
 ip address 150.100.32.4 255.255.224.0
 no ip directed-broadcast
 encapsulation frame-relay
 ip ospf network point-to-multipoint
 ip ospf priority 0
 logging event subif-link-status
 logging event dlci-status-change
 no fair-queue
 frame-relay map ip 150.100.32.10 403 broadcast

ROUTER-4#sh fram map
Serial0 (up): ip 150.100.32.10 dlci 403(0x193,0x6430), static,
              broadcast,
              CISCO, status defined, active
ROUTER-4#sh ip os n

Neighbor ID Pri State Dead Time Address Interface
172.168.10.65 100 EXSTART/ - 00:01:43 150.100.32.10 Serial0
ROUTER-4#

R10
interface Serial0/0
 ip address 150.100.32.10 255.255.224.0
 encapsulation frame-relay
 ip ospf network point-to-multipoint
 ip ospf priority 100
 no ip mroute-cache
 logging event subif-link-status
 logging event dlci-status-change
 no fair-queue
 frame-relay map ip 150.200.32.2 302 broadcast
 frame-relay map ip 150.200.32.4 304 broadcast

ROUTER-10#sh fram map
Serial0/0 (up): ip 150.200.32.2 dlci 302(0x12E,0x48E0), static,
              broadcast,
              CISCO, status defined, active
Serial0/0 (up): ip 150.200.32.4 dlci 304(0x130,0x4C00), static,
              broadcast,
              CISCO, status defined, active
ROUTER-10#sh ip os n

Neighbor ID Pri State Dead Time Address Interface
150.200.16.2 0 EXSTART/ - 00:01:49 150.100.32.2 Serial0/0
172.168.64.4 0 EXCHANGE/ - 00:01:56 150.100.32.4 Serial0/0
ROUTER-10#

ROUTER-10#deb ip os adj
OSPF adjacency events debugging is on
ROUTER-10#
*Feb 28 19:03:48 EST: OSPF: Retransmitting DBD to 150.200.16.2 on Serial0/0
*Feb 28 19:03:48 EST: OSPF: Up DBD Retransmit cnt to 6 for 150.200.16.2 on
Serial0/0
*Feb 28 19:03:48 EST: OSPF: Send DBD to 150.200.16.2 on Serial0/0 seq 0xBF6
opt 0x42 flag 0x7 len 32
ROUTER-10#
*Feb 28 19:03:50 EST: OSPF: Rcv DBD from 172.168.64.4 on Serial0/0 seq 0x1310
opt 0x2 flag 0x7 len 32 mtu 1500 state EXCHANGE
*Feb 28 19:03:50 EST: OSPF: Send DBD to 172.168.64.4 on Serial0/0 seq 0x1310
opt 0x42 flag 0x2 len 92
*Feb 28 19:03:50 EST: OSPF: Rcv DBD from 150.200.16.2 on Serial0/0 seq 0x8B2
opt 0x2 flag 0x7 len 32 mtu 1500 state EXSTART
*Feb 28 19:03:50 EST: OSPF: First DBD and we are not SLAVE
ROUTER-10#
*Feb 28 19:03:53 EST: OSPF: Retransmitting DBD to 150.200.16.2 on Serial0/0
*Feb 28 19:03:53 EST: OSPF: Up DBD Retransmit cnt to 7 for 150.200.16.2 on
Serial0/0
*Feb 28 19:03:53 EST: OSPF: Send DBD to 150.200.16.2 on Serial0/0 seq 0xBF6
opt 0x42 flag 0x7 len 32
ROUTER-10#
*Feb 28 19:03:55 EST: OSPF: Rcv DBD from 150.200.16.2 on Serial0/0 seq 0x8B2
opt 0x2 flag 0x7 len 32 mtu 1500 state EXSTART
*Feb 28 19:03:55 EST: OSPF: First DBD and we are not SLAVE
*Feb 28 19:03:55 EST: OSPF: Rcv DBD from 172.168.64.4 on Serial0/0 seq 0x1310
opt 0x2 flag 0x7 len 32 mtu 1500 state EXCHANGE
*Feb 28 19:03:55 EST: OSPF: Send DBD to 172.168.64.4 on Serial0/0 seq 0x1310
opt 0x42 flag 0x2 len 92
ROUTER-10#
*Feb 28 19:03:58 EST: OSPF: Retransmitting DBD to 150.200.16.2 on Serial0/0
*Feb 28 19:03:58 EST: OSPF: Up DBD Retransmit cnt to 8 for 150.200.16.2 on
Serial0/0
*Feb 28 19:03:58 EST: OSPF: Send DBD to 150.200.16.2 on Serial0/0 seq 0xBF6
opt 0x42 flag 0x7 len 32
ROUTER-10#un a
*Feb 28 19:04:00 EST: OSPF: Rcv DBD from 150.200.16.2 on Serial0/0 seq 0x8B2
opt 0x2 flag 0x7 len 32 mtu 1500 state EXSTART
*Feb 28 19:04:00 EST: OSPF: First DBD and we are not SLAVE
*Feb 28 19:04:00 EST: OSPF: Rcv DBD from 172.168.64.4 on Serial0/0 seq 0x1310
opt 0x2 flag 0x7 len 32 mtu 1500 state EXCHANGE
*Feb 28 19:04:00 EST: OSPF: Send DBD to 172.168.64.4 on Serial0/0 seq 0x1310
opt 0x42 flag 0x2 len 92

• Next message: Cox, Bryan: "RE: OSPF area 0 VLSM summarization"
• Previous message: Calkins Bob: "RE: OSPF pinging loopback address"
• Next in thread: Ronald Ramcharran: "Re: Can't get OSPF Point-to-Multipoint out of EXSTART"
• Maybe reply: Ronald Ramcharran: "Re: Can't get OSPF Point-to-Multipoint out of EXSTART"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:29:38 GMT-3