From: Asbjorn Hojmark (Asbjorn@xxxxxxxxxxx)
Date: Sun Mar 04 2001 - 20:03:19 GMT-3
> On a Cat6509 with two sups and two msfc's installed. I know you
> can use the 'switch sup' command to take you to the first msfc,
> assuming slot one is the active sup. But how do I get a console
> connection to the second msfc?
I'm assuming you actually need a console connection and not a
VTY connection. (A VTY connection is easily done by using the
'session' command).
If you need a true console connection to the MSFC on the second
supervisor, I believe the only way is to pull the blade out,
connect a console cable to the on-board console port, let the
cable go round the back of the blade and under it to a free slot
in the box.
HTH,
-A
-- Heroes: Vint Cerf & Bob Kahn, Leonard Kleinrock, Robert Metcalfe Links : http://www.hojmark.org/networking/
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:29:20 GMT-3