From: tom cheung (tkc9789@xxxxxxxxxxx)
Date: Thu Mar 01 2001 - 17:50:48 GMT-3
Ctrl-Shift-6, Ctrl-Shift-6, x works good!!
Thanks to everybody who responded.
>From: "Scott Morris" <smorris@mentortech.com>
>Reply-To: <smorris@mentortech.com>
>To: "'tom cheung'" <tkc9789@hotmail.com>, <ccielab@groupstudy.com>
>Subject: RE: Term Serv escape sequence
>Date: Thu, 1 Mar 2001 14:10:29 -0500
>
>Ctrl-Shift-6, Ctrl-Shift-6, x
>
>Enjoy!
>
>-----Original Message-----
>From: nobody@groupstudy.com [mailto:nobody@groupstudy.com]On Behalf Of
>tom cheung
>Sent: Thursday, March 01, 2001 1:58 PM
>To: ccielab@groupstudy.com
>Subject: Term Serv escape sequence
>
>
>Dear Group,
>I have the following setup:
>
>r1
>|
>|(ethernet)
>|
>2509 term-serv
>|
>|(async)
>|
>r2
>
>When I telnet from r1 into a 2509 acting as a terminal server, reverse
>telnet into r2, login, then do a 'cntl+shift+6+x', I'll escape back to r1.
>Does anybody konw what's the proper sequence to escape back to the terminal
>server instead? Thanks,
>
>
>
>
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:29:17 GMT-3