From: Russ Meyer (rmeyer@xxxxxxxxx)
Date: Thu Mar 01 2001 - 15:23:47 GMT-3
Hi Chuck,
It is basically a quick way for me to look through the output of a bunch of
commands all at once. I would be looking for mostly what IOS versions he is
running. Also any differences in hardware revisions etc... There also may
be something in the "show controllers" portion that could be causing a
problem.
Regards,
Russ Meyer
919-392-4486
rmeyer@cisco.com
-----Original Message-----
From: Chuck Larrieu [mailto:chuck@cl.cncdsl.com]
Sent: Thursday, March 01, 2001 12:23
To: Russ Meyer; ccielab@groupstudy.com
Subject: RE: What is problem?
Russ, I haven't fooled with show tech much.
What are the kinds of things you would look for in the output - saved to
file, since it is a LOT of lines?
Chuck
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of Russ
Meyer
Sent: Thursday, March 01, 2001 8:58 AM
To: ccielab@groupstudy.com
Subject: RE: What is problem?
Importance: Low
are both routers running the same version of IOS? post a show tech from
each router while they are in a failed state.
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com]On Behalf Of
Chuck Larrieu
Sent: Thursday, March 01, 2001 11:28
To: philip guo; ccielab@groupstudy.com
Subject: RE: What is problem?
Can't duplicate it here. What is your debug ppp negotiation showing?
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
philip guo
Sent: Thursday, March 01, 2001 7:22 AM
To: ccielab@groupstudy.com
Subject: What is problem?
I got a wierd problem when I did lab.
R1 and R2 connected by serial link ( encap PPP no Chap
). Both routers config IPX routing with EIGRP.
They can not talk with each other. But after you
remove the PPP encap , then everything is fine. I
wonder if PPP can arose any problem to IPX ?
Thanks for help.
Philip
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:29:17 GMT-3