From: Sara Li (saralilin@xxxxxxxxxxx)
Date: Thu Mar 01 2001 - 15:50:53 GMT-3
session 15 goes to router module, normal console is in switch mode, you can
configure switch feature under normal console, router feature in router
mode.
Sara
>From: ccie sin <cciesin@yahoo.com>
>Reply-To: ccie sin <cciesin@yahoo.com>
>To: Atul Pawar <atulpawar@hotmail.com>
>CC: ccielab@groupstudy.com
>Subject: Re: MSFC in CAT 6
>Date: Thu, 1 Mar 2001 06:28:14 -0800 (PST)
>
>Hi all again ,
>I have do a dir and there are 2 image files.
>One is the bootimage and the other is the normal
>image.
>I try this " boot system <image.file> " command and
>reboot but still doesn't work.
>
>Btw , is there any difference between session 15 and
>switch console ???
>
>--- Atul Pawar <atulpawar@hotmail.com> wrote:
> > It can happen if you have the wrong boot statement
> > Or you can first check if the right image is there
> > in the bootflash and then
> > try booting manually from that image. If you have
> > slot0 you can boot from
> > there as well . Please check the CCO document for
> > more info.
> > Cheers
> > Atul
> >
> >
> > http://www.cisco.com/warp/public/473/14.html#ios
> > ----- Original Message -----
> > From: "ccie sin" <cciesin@yahoo.com>
> > To: <ccielab@groupstudy.com>
> > Sent: Thursday, March 01, 2001 1:48 PM
> > Subject: MSFC in CAT 6
> >
> >
> > > Hi all ,
> > > I was trying to configure the MSFC in CAT6.
> > > But MSFC card boot up to router(boot)# , even
> > thought
> > > i change the register to 0x2102 . I even try 0x102
> > but
> > > can't help.
> > >
> > > I try to do a break during boot-up but also
> > cannot.
> > > Please help!!!
> > >
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:29:17 GMT-3