From: ccie sin (cciesin@xxxxxxxxx)
Date: Thu Mar 01 2001 - 11:28:14 GMT-3
Hi all again ,
I have do a dir and there are 2 image files.
One is the bootimage and the other is the normal
image.
I try this " boot system <image.file> " command and
reboot but still doesn't work.
Btw , is there any difference between session 15 and
switch console ???
--- Atul Pawar <atulpawar@hotmail.com> wrote:
> It can happen if you have the wrong boot statement
> Or you can first check if the right image is there
> in the bootflash and then
> try booting manually from that image. If you have
> slot0 you can boot from
> there as well . Please check the CCO document for
> more info.
> Cheers
> Atul
>
>
> http://www.cisco.com/warp/public/473/14.html#ios
> ----- Original Message -----
> From: "ccie sin" <cciesin@yahoo.com>
> To: <ccielab@groupstudy.com>
> Sent: Thursday, March 01, 2001 1:48 PM
> Subject: MSFC in CAT 6
>
>
> > Hi all ,
> > I was trying to configure the MSFC in CAT6.
> > But MSFC card boot up to router(boot)# , even
> thought
> > i change the register to 0x2102 . I even try 0x102
> but
> > can't help.
> >
> > I try to do a break during boot-up but also
> cannot.
> > Please help!!!
> >
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:29:17 GMT-3