From: Jason1 (jason1@xxxxxxxxxx)
Date: Wed Feb 28 2001 - 23:15:40 GMT-3
Correct me if I'm wrong but it would support the 1FE but doesn't support
trunking right ? :-)
----- Original Message -----
From: "Jim Brown" <Jim.Brown@CaseLogic.com>
To: "'Wade Edwards'" <wade.edwards@powerupnetworks.com>; "Steven Weber"
<itweber@earthlink.net>; "CCIE GROUP" <ccielab@groupstudy.com>
Sent: Thursday, March 01, 2001 7:26 AM
Subject: RE: 2613....
> I was scanning the archives this weekend and there is a version of IOS
12.1?
> that supports the 1FE.
>
> Someone was happily using the interface in their 2600 router.
>
> I checked the version release notes of the IOS on the Cisco site and sure
> enough, it states the 1FE as a supported module for that particular
release.
>
> It was only supported on this one release and none of the following. I
think
> it was an XK release also.
>
> -----Original Message-----
> From: Wade Edwards [mailto:wade.edwards@powerupnetworks.com]
> Sent: Wednesday, February 28, 2001 4:18 PM
> To: Steven Weber; CCIE GROUP
> Subject: RE: 2613....
>
>
> The 2610, 2611, 2612 and 2613 do not support fastethernet network modules.
>
> -----Original Message-----
> From: nobody@groupstudy.com [mailto:nobody@groupstudy.com]On Behalf Of
> Steven Weber
> Sent: Wednesday, February 28, 2001 5:01 PM
> To: CCIE GROUP
> Subject: 2613....
>
>
>
> can I put a nm-1fe into a 2613 to do trunking?
>
>
>
> --- Steven Weber
>
> --- itweber@earthlink.net
>
> --- EarthLink: It's your Internet.
>
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:29:10 GMT-3