From: Norberto Padin (npadin@xxxxxxxxx)
Date: Thu Mar 01 2001 - 00:09:07 GMT-3
Hello folks.
The AUXs are up and running.
Thank you very much for your help.
Nor.
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com]On Behalf Of
Yi Fang
Sent: Wednesday, February 28, 2001 11:15 AM
To: itweber@earthlink.net; Norberto Padin; ccielab@groupstudy.com
Subject: Re: AUX port used to connect consoles
If your router doesn't have async port, in most case you will use port =
2001.
Do a "sh line", find out correct aux port.
Yi Fang
----- Original Message -----=20
From: Steven Weber=20
To: Norberto Padin ; ccielab@groupstudy.com ; Yi Fang=20
Sent: Wednesday, February 28, 2001 11:00 AM
Subject: Re: AUX port used to connect consoles
what TCP port do you use in the host table?
----- Original Message -----=20
From: Yi Fang=20
To: ccielab@groupstudy.com;Norberto Padin
Sent: 2/28/01 12:51:10 PM=20
Subject: Re: AUX port used to connect consoles
1, setup aux port like access server async port.
2, in most cases, use rollover cable from aux to con.
3, depending router type of r1, r2, r3, map the correct reverse =
telnet port.
Yi Fang
----- Original Message -----
From: "Norberto Padin" <npadin@cisco.com>
To: <ccielab@groupstudy.com>
Sent: Wednesday, February 28, 2001 2:58 PM
Subject: AUX port used to connect consoles
> Hello group.
> Since I'm running out of access server console ports, I'd like to =
use AUXs
> ports to concentrate CON ports from other routers.
> Does anybody know how can achieve this?
> ____ #1_______ [CON R1_____AUX R1]________[CON R4]
> Access Server /_____#2_______ [CON R2_____AUX R2]________[CON R5]
> \_____#3_______ [CON R3_____AUX R3]________[CON R6]
> TIA.
> Nor.
>
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:29:10 GMT-3