From: Yi Fang (yfang@xxxxxxxxxxxxxxxxxxxxx)
Date: Wed Feb 28 2001 - 14:40:53 GMT-3
1, setup aux port like access server async port.
2, in most cases, use rollover cable from aux to con.
3, depending router type of r1, r2, r3, map the correct reverse telnet port.
Yi Fang
----- Original Message -----
From: "Norberto Padin" <npadin@cisco.com>
To: <ccielab@groupstudy.com>
Sent: Wednesday, February 28, 2001 2:58 PM
Subject: AUX port used to connect consoles
> Hello group.
> Since I'm running out of access server console ports, I'd like to use AUXs
> ports to concentrate CON ports from other routers.
> Does anybody know how can achieve this?
> ____ #1_______ [CON R1_____AUX R1]________[CON R4]
> Access Server /_____#2_______ [CON R2_____AUX R2]________[CON R5]
> \_____#3_______ [CON R3_____AUX R3]________[CON R6]
> TIA.
> Nor.
>
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:29:09 GMT-3