From: Jason Baker (Jason.Baker@xxxxxxxxxxxxx)
Date: Tue Feb 27 2001 - 19:27:49 GMT-3
correction:
the NM-1e and NM-4e are supported by the 2600 series as per cisco site and
the
Cisco products quick refernce guide
Regards,
Jason Baker
Network Engineer
MCSE, CCNA
-----Original Message-----
From: Christopher M. Heffner [mailto:cheffner@certified-labs.net]
Sent: Wednesday, February 28, 2001 3:47 AM
To: Maness, Drew; Gary Marsh; Kevin Wigle; Jim Brown;
ccielab@groupstudy.com
Cc: cisco@groupstudy.com
Subject: RE: NM-1E
Beware ... the wic-1e is currently only support on the Cisco 1700
product line. Cisco list the Wic-1e as unsupport on the 1600, 2600 and
3600 platforms currently. Maybe in the future.
Christopher M. Heffner
IMCR Course Director
Certified Cisco Systems Instructor
CCSI, MCT, MCNI, CLI, ASE, CTT, A+
cheffner@certified-labs.net
-----Original Message-----
From: Maness, Drew [mailto:drew.maness@veritect.com]
Sent: Tuesday, February 27, 2001 11:42 AM
To: Christopher M. Heffner; Gary Marsh; Kevin Wigle; Jim Brown;
ccielab@groupstudy.com
Cc: cisco@groupstudy.com
Subject: RE: NM-1E
Cisco now offers a WIC-1E for the 1600, 1700, 2600, and 3600. It
retails
for $238 USD on cdw.com It is only 10mb
Hope that helps
Drew
-----Original Message-----
From: Christopher M. Heffner [mailto:cheffner@certified-labs.net]
Sent: Tuesday, February 27, 2001 7:22 AM
To: Gary Marsh; Kevin Wigle; Jim Brown; ccielab@groupstudy.com
Cc: cisco@groupstudy.com
Subject: RE: NM-1E
If you only the 2610 then you might want to think about selling or
swapping the 2610 for a 2611 instead. It might be cheaper in the long
run.
I found out the hard way last week that any Lan module with the wic
slots are NOT support by Cisco in the 2600 family. I was trying to add
more serial interfaces to my 2621 last week to simulate the ANEW 2 labs.
Cisco says only the NM-1E or NM-4E is support in slot 1 for LAN modules.
My choices were to use either the NM-2W module for my serial interfaces
or to upgrade from the WIC-1T cards to the WIC-2T or WIC-2AS cards or
use my 3640 instead.
Good Luck,
Christopher M. Heffner
IMCR Course Director
Certified Cisco Systems Instructor
CCSI, MCT, MCNI, CLI, ASE, CTT, A+
cheffner@certified-labs.net
-----Original Message-----
From: Gary Marsh [mailto:gfm@tesco.net]
Sent: Tuesday, February 27, 2001 6:35 AM
To: Kevin Wigle; Jim Brown; ccielab@groupstudy.com
Cc: cisco@groupstudy.com
Subject: RE: NM-1E
If you live in the UK, then check out www.prodec.co.uk, telephone 01344
867777 they will more than likely negotiate a good deal for you from
their
range of second hand Cisco kit.
Gary
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com]On Behalf Of
Kevin
Wigle
Sent: Saturday, February 24, 2001 6:47 AM
To: Jim Brown; ccielab@groupstudy.com
Cc: cisco@groupstudy.com
Subject: Re: NM-1E
well........ there is the NM-4E (4 ethernet ports) but if you think the
1E
is expensive don't look there.
----- Original Message -----
From: "Jim Brown" <Jim.Brown@CaseLogic.com>
To: <ccielab@groupstudy.com>
Cc: <cisco@groupstudy.com>
Sent: Friday, 23 February, 2001 13:35
Subject: WTB: NM-1E
>
> Sorry for posting this here, but I thought is semi-appropriate. This
is
gear
> for my home lab.
>
> I'm looking for an Ethernet module for a 2600 series router and I
think
this
> is the only one that is supported.
>
> I have checked E-bay for a while and there are none to be found.
>
> Can anyone help me out, retail hurts!
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:29:08 GMT-3