From: MASK (afaqk@xxxxxxxxxxxxxx)
Date: Tue Feb 27 2001 - 14:33:13 GMT-3
hi,
i've tried loading IOS via slot0: but it gives this
error.
rommon 6 > boot slot0:c3640-is-mz.120-4.T.bin..bin
device does not contain a valid magic number
loadprog: error - on file open
boot: cannot load "slot0:c3640-i"-mz.120-4.T.bin..bin
rommon 7 >
i think, only hope is now loading CON port.
i'm gonna try it now.
Thx
--- Richard Gallagher <rgallagh@cisco.com> wrote:
> It look like it is still trying to boot from the
> internal flash even though you
> may have a valid image in slot0:
>
> So try to enter the following command at rommon when
> a valid image is in slot0:
>
> boot slot0:filename
>
> otherwise you may have to do a xmoden transfer of
> the IOS to the internal
> flash.
>
> Rich
>
> On Feb 27, 4:51pm, MASK chatted about:
> > Subject:Problem with 3640
> > hi guys,
> >
> > My 3640 router, which was functioning like champ
> till
> > yesterday, is now, going continuously into ROMMON
> > mode, i dunno what the heck with it, following is
> the
> > error output from 3640 console.
> > ===============
> > System Bootstrap, Version 11.1(20)AA2, EARLY
> > DEPLOYMENT RELEASE SOFTWARE (fc1)
> > C3600 processor with 32768 Kbytes of main memory
> > Main memory is configured to 64 bit mode with
> parity
> > disabled
> >
> > loadprog: bad file magic number: 0x0
> > boot: cannot load "flash:"
> > ===============
> > and i've tried putting a valid 3640 image in
> > slot0:/slot1:, but it gives the same error message
> > with slot0:/slot1: mentioned.
> >
> > i.e.,
> > ================
> >
> > System Bootstrap, Version 11.1(20)AA2, EARLY
> > DEPLOYMENT RELEASE SOFTWARE (fc1)
> > C3600 processor with 32768 Kbytes of main memory
> > Main memory is configured to 64 bit mode with
> parity
> > disabled
> >
> > device does not contain a valid magic number
> > boot: cannot open "slot0:"
> > boot: cannot determine first file name on device
> > "slot0:"
> > =================
> >
> > Someone plz help me out!!!!
> >
> > Thx
> >
> >
> >
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:29:07 GMT-3