From: Steven Weber (itweber@xxxxxxxxxxxxx)
Date: Mon Feb 26 2001 - 17:55:49 GMT-3
if they are still in the init state then this means that the routers have
not yet finished loading, the spf algorithm has not completly executed. Wait
until they have reached the full state and you will then see that aDB has been
elected
----- Original Message -----
From: Fabricio Aponte
Sent: 2/26/01 3:42:25 PM
Subject: IP OSPF neigh in INIT/DROTHER
state
I got two routers connected to each other via an ethernet
hub. R2 and R5.
This is the show ip ospf neigh on r 2 and show ip ospf int e 0 on
both
routers. Both routers are electing each other as the DR and no
BDR (they do
not see each other).
Why are these two guys not electing a DR?
Why is R5 not even seeing R2 as a neighbor?
r2#show ip ospf neigh
Neighbor ID Pri
State Dead
Time Address
Interface
172.168.91.1 1
INIT/DROTHER 00:00:30 216.12.210.81
Ethernet0
r2#show ip ospf int e 0
Ethernet0 is up, line protocol is up
Internet Address 216.12.210.82/24, Area 0
Process ID 99, Router ID 100.100.100.1, Network Type BROADCAST,
Cost: 10
Transmit Delay is 1 sec, State DR, Priority 1
Designated Router (ID) 100.100.100.1, Interface address
216.12.210.82
No backup designated router on this network
Timer intervals configured, Hello 10, Dead 40, Wait 40,
Retransmit 5
Hello due in 00:00:04
Index 1/1, flood queue length 0
Next 0x0(0)/0x0(0)
Last flood scan length is 0, maximum is 0
Last flood scan time is 0 msec, maximum is 0 msec
Neighbor Count is 1, Adjacent neighbor count is 0
Suppress hello for 0 neighbor(s)
r2#
[Resuming connection 5 to r5 ... ]
r5#show ip ospf int e 0
Ethernet0 is up, line protocol is up
Internet Address 216.12.210.81/24, Area 0
Process ID 99, Router ID 172.168.91.1, Network Type BROADCAST,
Cost: 10
Transmit Delay is 1 sec, State DR, Priority 1
Designated Router (ID) 172.168.91.1, Interface address
216.12.210.81
No backup designated router on this network
Timer intervals configured, Hello 10, Dead 40, Wait 40,
Retransmit 5
Hello due in 00:00:09
Neighbor Count is 0, Adjacent neighbor count is 0
Suppress hello for 0 neighbor(s)
Thank you,
fabricio
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:29:03 GMT-3