From: Yurchenko, Michael (michael.yurchenko@xxxxxxxxxxx)
Date: Mon Feb 26 2001 - 17:54:53 GMT-3
Umm, if i may respectfully inquire, how exactly would one get access to
ROMMON when console port is not functional?
Michael Yurchenko
CCIE# 6695, CCDP, CCNP ATM Specialist, MCSE
Customer Support Engineer - 2
michael.yurchenko@verizon.com
610-407-2154
-----Original Message-----
From: frank wells [mailto:fwells12@hotmail.com]
Sent: Monday, February 26, 2001 3:45 PM
To: ccielab@groupstudy.com
Subject: Re: challenge q
Reboot the router and get to ROMMON. Change the config register to 0x2142.
Reload the router, it will boot normally but it will not start the startup
script. Log on as normal. Go to 'line aux 0' and type in 'transport input
all', 'modem inout', 'login' and password xxxx' Once you have done that,
change the config register back to 0x2102 and reboot it again. Make sure
you have are plugged into the aux port with your terminal emulation program.
You will now have access to the router just like over the console port.
>From: MASK <afaqk@rocketmail.com>
>Reply-To: MASK <afaqk@rocketmail.com>
>To: ccielab@groupstudy.com
>Subject: challenge q
>Date: Mon, 26 Feb 2001 12:25:45 -0800 (PST)
>
>hi,
>
>I've a router (2501), whose Console port is faulty,
>and its AUX port has an unknown password set onto it,
>and to make the matter worse its all interfaces are
>shut down, so we cant even telnet to it!!
>
>anyone has got any clue??? how can i make this router
>usable?
>
>i know many gr8 minds are on this list!!
>
>thanks
>
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:29:03 GMT-3