From: Lauren_Dygowski@xxxxxxxxxxxx
Date: Mon Feb 26 2001 - 15:02:46 GMT-3
With ATM and frame you will need a protcol mapping pointing to the local IP via
a PVC when using multipoint.
For example, with frame:
r1(config)#int s0/0.10 multipoint
r1(config-subif)#ip address 137.34.4.2 255.255.255.0
r1(config-subif)#frame-relay map ip 137.34.4.2 100 broadcast
"Dan Skiptunas" <dskiptunas@jannon.com> on 02/26/2001 12:32:25 PM
Please respond to "Dan Skiptunas" <dskiptunas@jannon.com>
To: ccielab@groupstudy.com
cc: (bcc: Lauren Dygowski/IT/VGI)
Subject: Point-to-multipoint interface
What do I need to do to be able to ping a local interface with a
point-to-multipoint interface ?
Dan Skiptunas
Network Engineer
NEC-BNS
Office :203-461-9200 ex.421
Pager : 888.672.8636
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:29:03 GMT-3