From: Chuck Larrieu (chuck@xxxxxxxxxxxxx)
Date: Mon Feb 26 2001 - 13:06:07 GMT-3
This is the Enterprise Design Tool from NetformX. My employer has rolled
this out to all us sales engineer types, and I use it regularly.
Yes it is fairly decent, and I find it useful.
Yes there are a number of irritating bugs. For example, one cannot place a
redundant supervisor into a 6509. This is a problem that will be fixed "real
soon now"
There are devices where available blades do not show up.
But I would say in general this is very useful if you are aware of the
limits.
Oh yeah - some of the product lines are not well handled in the design tool.
Aironet, for example. Very high end switches, for example (as if I sell a
lot of those ;-> )
Also, it can be difficult to find the IOS image you want.
I've sounded negative. Let me assure that I use the tool daily, and in
general I like it a lot.
Chuck
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
McCallum, Robert
Sent: Monday, February 26, 2001 6:03 AM
To: 'Ccielab' (E-mail); Cisco@Groupstudy. Com (E-mail)
Subject: Cisco Network Design
Does anyone out there use the Cisco Network Designer tool? If so what are
your views on it.
Here is the link to view the actual tool.
http://www.cisco.com/partner/cnd/inside.html
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:29:02 GMT-3