From: Balcerzak, Bart (Lucent) (bart.balcerzak-eds@xxxxxxx)
Date: Mon Feb 26 2001 - 09:45:07 GMT-3
Only use the ospf demand circuit command on one end not both....
-----Original Message-----
From: chunyuchen [mailto:chunyuchen@kimo.com.tw]
Sent: Monday, February 26, 2001 7:28 AM
To: CCIE Group Study
Subject: OSPF demand Circuit Problem
Dear all,
Who can help me to fix OSPF demand circuit problem.
It is alway connect to each other via isdn.
if the idle-time-out is expire.
It will re-connection to each other.
My configuration as following,
R3#show ip ospf neighbor
Neighbor ID Pri State Dead Time Address =
Interface
6.6.6.6 1 INIT/ - 00:00:36 33.33.33.6 BRI0
R6#show ip ospf neighbor
Not thing.
R6
interface BRI0
ip address 33.33.33.6 255.255.255.0
no ip directed-broadcast
encapsulation ppp
ip ospf demand-circuit
dialer idle-timeout 180
dialer map ip 33.33.33.3 name r3 broadcast 12711291
dialer-group 1
ppp authentication pap
!
router ospf 1
network 33.33.33.0 0.0.0.255 area 0
network 6.6.6.0 0.0.0.255 area 0
!
ip classless
R3:
interface BRI0
=20
ip address 33.33.33.3 255.255.255.0
no ip directed-broadcast
encapsulation ppp
ip ospf demand-circuit
dialer idle-timeout 180
dialer map ip 33.33.33.6 name r6 12711323
dialer load-threshold 128 outbound
dialer-group 1
ppp authentication pap
!
router eigrp 1
variance 18
network 10.0.0.0
network 3.0.0.0
no auto-summary
!
router ospf 1
network 33.33.33.0 0.0.0.255 area 0
network 3.3.3.0 0.0.0.255 area 0
Thanks
Regards
Jerry
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:29:02 GMT-3