From: C. Warren (ccie2000@xxxxxxxx)
Date: Sun Feb 25 2001 - 19:13:56 GMT-3
pvc's are reversed....you show 14/101 from R1 to ls1010, but show it
arriving the ls1010 as 13/100.
r1 ls1010(atm 0/1/1)
14/101 14/101 not 13/100
r2 ls1010(atm0/1/0)
13/100 13/100 not 14/101
Chuck
----- Original Message -----
From: "David Fahed" <dfahed@ais.gp>
To: <ccielab@groupstudy.com>
Sent: Sunday, February 25, 2001 3:34 PM
Subject: ATM simple PVC config
> Hi,
>
> Problem with a simple PVC config:
> R1----ATM0/1/1Ls1010ATM0/1/0------R2
> Cannot ping R1 from R2 and cannot ping R2 from R1.
>
> Debug ip packet sh no problem of encapsulation put the packet don't arrive
on
> the distant router. So I think it is a problem with the LS1010 and the PVC
conf.
> but I can't find the problem
>
> 10 days left .....
>
>
> R1 :
> interface ATM0/0
> ip address 145.145.145.142 255.255.255.0
> no ip directed-broadcast
> no atm ilmi-keepalive
> pvc 14/101
> protocol ip 145.145.145.132 broadcast
>
> Ls 1010 :
> interface ATM0/1/0
> no ip address
> no ip directed-broadcast
> no atm ilmi-keepalive
> !
> interface ATM0/1/1
> no ip address
> no ip directed-broadcast
> no atm ilmi-keepalive
> atm pvc 13 100 interface ATM0/1/0 14 101
>
> R2:
> interface ATM0/0
> ip address 145.145.145.132 255.255.255.0
> no ip directed-broadcast
> no atm ilmi-keepalive
> pvc 13/100
> protocol ip 145.145.145.142 broadcast
>
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:29:00 GMT-3