From: Norberto Padin (npadin@xxxxxxxxx)
Date: Fri Feb 23 2001 - 17:29:34 GMT-3
Hello guys.
There is a way to generate circuits using a couple of routers.
Try with this:
Router-1
source-bridge ring-group 12
dlsw local-peer peer-id 10.1.1.2
dlsw remote-peer 0 tcp 10.1.1.1
dlsw bridge-group 1
!
!
dspu vdlc 12 4000.1111.1111
dspu vdlc enable-host lsap 12
!
dspu host TOKEN xid-snd 05d77708 rmac 4000.4040.0000 rsap 4 lsap 12
dspu pool pool_lu host TOKEN lu 2 3
!
dspu vdlc start TOKEN
!
Router-2
dspu pu ROUTER1 xid-rcv 05d77708 ---> this receives the things that Router-1
sends
!
dspu pu PC3270 xid-rcv 05d77707
!
dspu pu SDLC xid-rcv 05d77709
!
interface FastEthernet0
mac-address 0200.0202.0000
ip address 12.1.1.2 255.255.255.0
no ip directed-broadcast
bridge-group 5
!
dspu enable-pu lsap 4
dspu enable-pu lsap 8
dspu enable-pu lsap 12
dspu enable-pu lsap 16
!
Bridge 5 protocol ieee
Hope it helps.
Enjoy.
Nor.
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com]On Behalf Of
Tariq Sharif
Sent: Thursday, February 22, 2001 10:57 AM
To: Ccielab@Groupstudy. Com
Subject: How to Test DLSw+
Any ideas on how to test DLSw+, other than 2 Token-Ring PCs (Win95/NT4) with
NetBEUI? e.g. can you do reasonably thorough testing without PCs? Its a pain
getting PCs setup etc
Many thanks & regards.
Tariq Sharif
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:28:58 GMT-3