From: Daniel M. Dawson (dandawson@xxxxxxxxxx)
Date: Fri Feb 23 2001 - 01:33:48 GMT-3
I think your problem is that the IP addresses that your put on the command
line after the virtual-link keyword has to be the OSPF router ID not just
any interface.
Daniel M. Dawson
Member Consulting Staff
Lucent Worldwide Services
Lucent Technologies
Mobile: (405) 850-1493
Pager: (800) 622-9202
E-mail: dandawson@lucent.com
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com]On Behalf Of
Devon Watkins
Sent: Thursday, February 22, 2001 10:13 PM
To: ccielab@groupstudy.com
Subject: OSPF virtual link
Group,
I am working on OSPF virtual links. In the past I had thought was fairly
easy, but now I have a problem that has me stumped.
Here is what I have:
Rtr 1 has an ethernet link in area 1
Rrt 2 has an ethernet link in area 1 also
Rtr 2 has a link in area 0
so far so good, but then...
I add a serial interface on Rtr 1 to area 2 and add the following config
info:
rtr 1
area 1 virtual-link <pingable ip on rtr 2, in area 0>
rtr 2
area 1 virtial-link <ip interface of serial interface in area 2 of rtr1 (is
pingable)>
Any idea of what I am screwing up?
Thanks
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:28:58 GMT-3