From: C. Warren (ccie2000@xxxxxxxx)
Date: Thu Feb 22 2001 - 21:34:49 GMT-3
Check the errata on point 1. Marc reflects it should be 10, not 5.
----- Original Message -----
From: "Flack, Les" <les_flack@hotmail.com>
To: <ccielab@groupstudy.com>
Sent: Thursday, February 22, 2001 4:05 PM
Subject: cciebootcamp lab 17. ospf on demand question.
> I'm confused about the given solution to lab 17 for the ospf on-demand =
> over isdn
>
> 1. The r6 solution shows a virtual-link over area 5 but I believe that =
> should be area 10 - the transit area to area 0. Is this just a typo or =
> am I missing something?
>
> 2. On r6 I put the bri into area 5 but the solution doesn't show a =
> network statement under router ospf for this.
>
> 3. CCD and Caslow states only put ip ospf demand circuit at one end. The =
> lab 17 solution and Fatkid show the command at both ends. What's the =
> view on this.
>
> 4. I expected to see the demand ospf neighbour stay up on both ends but =
> r5 retains the neighbour relationship with no dead time as expected but =
> on r6 I see the neighbour with no dead time but it disappears (debug =
> OSPF: Force to kill nbr 15.15.5.5 on BRI0)
>
> regards
>
> Les
>
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:28:57 GMT-3