From: NoOne Important (lm_nguyen@xxxxxxxxxxx)
Date: Thu Feb 22 2001 - 14:57:52 GMT-3
<html><DIV>
<P>COMMSERVER(config-crypto-map)#set ?<BR> algorithm &nb
sp; Encryption/Decryption algor
ithms to use.<BR> peer &nb
sp; Allowed Encryption/Decrypti
on peer.<BR> security-association Security association parameters<B
R> transform-set Specify
list of transform sets in priority order</P>
<P> </P>
<P>My router can do that fine and i am only using ik2o3s-mz.120-7.T.bin</P>
<P>my suggestion is to erase the old config completely before try that scenario
on you routers.<BR><BR></P></DIV>
<DIV></DIV>
<DIV></DIV>>From: "fwells12" <FWELLS12@HOTMAIL.COM>
<DIV></DIV>>Reply-To: "fwells12" <FWELLS12@HOTMAIL.COM>
<DIV></DIV>>To: <CCIELAB@GROUPSTUDY.COM>
<DIV></DIV>>Subject: More IPSec questions.
<DIV></DIV>>Date: Wed, 21 Feb 2001 21:33:29 -0800
<DIV></DIV>>
<DIV></DIV>>I have 12.1.5T Enterprise/FW IPSec 56 installed on my two IPSec
routers. =
<DIV></DIV>> I am trying to get a handle on IPSec-manual keying procedures.
I have =
<DIV></DIV>>just attempted once more to configure the following lab on CCO:=
20
<DIV></DIV>>
<DIV></DIV>>http://www.cisco.com/warp/public/707/manual.html
<DIV></DIV>>
<DIV></DIV>>Im my IOS I could not find the commands for any of the 'set =
<DIV></DIV>>security-association' parameters. The only option I had that had
the =
<DIV></DIV>>same parameters was 'set session-key'. I copied the configs with
the =
<DIV></DIV>>exception of those parameters and it does not work thus far. Doe
s =
<DIV></DIV>>anyone know if this is the equivalent of the 12.0 IOS command 's
et =
<DIV></DIV>>security association' etc, or am I completely overlooking someth
ing =
<DIV></DIV>>here?
<DIV></DIV>>
<DIV></DIV>>I would also like to find some more examples of IPSec Manual Key
ing if =
<DIV></DIV>>anyone knows any more please.
<DIV></DIV>>
<DIV></DIV>>Cheers
<DIV></DIV>>
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:28:57 GMT-3