From: John Kaberna (jkaberna@xxxxxxxxxxxx)
Date: Thu Feb 22 2001 - 00:31:51 GMT-3
I wasn't sure if the LS 1010 has IMA modules. When I was trying to do
online ordering the LS 1010 isn't on the list of available products so I
wasn't able to check and see what modules were available. I could have dug
around CCO but as usual this list gives much better info much quicker.
Thanks a ton for the info and the configs.
John
----- Original Message -----
From: "Kevin Baumgartner" <kbaumgar@cisco.com>
To: <jkaberna@netcginc.com>
Cc: <ccielab@groupstudy.com>
Sent: Wednesday, February 21, 2001 7:22 PM
Subject: Re: (off topic) IMA and LS1010
> Why would you need a different type of switch? The LS1010 has IMA
> modules. And you should be able to do exactly what you want using a
> 2600 and LS1010.
>
> Kevin
>
> >
> > I would guess that at some point the IMA gets converted to regular ATM
in
> > the cloud. That is what I am hoping to accomplish with the LS 1010.
Take
> > an IMA T1 from a 2600 and connect to an LS 1010 and come out OC3 on the
> > other side. Maybe I need a different type of switch to do this.
> >
> > ----- Original Message -----
> > From: "kaushik" <kaushik@dnaco.net>
> > To: "'John Kaberna'" <jkaberna@hotmail.com>
> > Cc: "CCIE Lab groupstudy.com" <ccielab@groupstudy.com>
> > Sent: Wednesday, February 21, 2001 6:28 PM
> > Subject: RE: (off topic) IMA and LS1010
> >
> >
> > > john,
> > >
> > > I was under the impression that the ima, although it does do atm, is
> > purely
> > > a ima-to-ima connectivity. since the ima takes multiple T1s and the
way we
> > > use them is to connect multiple Ts to a particular WAN site. when
there is
> > > a requirement to have a large pipe to a particular site, but does not
> > > require a DS3, for example.
> > >
> > > I will do some research and I could be totally wrong.
> > >
> > > my 2cents worth
> > > kaushik
> > >
> > > -----Original Message-----
> > > From: John Kaberna [SMTP:jkaberna@hotmail.com]
> > > Sent: Wednesday, February 21, 2001 8:53 PM
> > > To: CCIE Lab groupstudy.com
> > > Subject: (off topic) IMA and LS1010
> > >
> > > Has anyone configured the 4 port IMA card on a 2600/3600 and connected
=
> > > to an LS 1010? I have a need to do IMA and don't know much about it.
=
> > > Any details would be greatly appreciated.
> > >
> > > John
> > >
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:28:56 GMT-3