From: D. J. Jones (meganac@xxxxxxxx)
Date: Wed Feb 21 2001 - 23:24:44 GMT-3
Haven't connected a 4 port IMA to LS 1010 but did run a back to back 8 port
ima (using 3 ports) in
a lab setting. Planning to bring a 4.5mb pvc on line over the next week.
Tried to operate it using
12.1.5 but had to load 12.1.6 before the box recognized the card. If you
plan to do VBR-NRT, make sure you don't have any firmware issues. I
configured 4 boxes and 3 of the four took my parms ok. One of the four
would only let me specify a PCR in the range 64-3000 (kb). Let us all know
your experience with the LS 1010 when you do it or perhaps someone else in
the group can share.
dj
----- Original Message -----
From: "John Kaberna" <jkaberna@hotmail.com>
To: "CCIE Lab groupstudy.com" <ccielab@groupstudy.com>
Sent: Wednesday, February 21, 2001 5:53 PM
Subject: (off topic) IMA and LS1010
> Has anyone configured the 4 port IMA card on a 2600/3600 and connected =
> to an LS 1010? I have a need to do IMA and don't know much about it. =
> Any details would be greatly appreciated.
>
> John
>
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:28:56 GMT-3