From: Kevin Baumgartner (kbaumgar@xxxxxxxxx)
Date: Wed Feb 21 2001 - 15:02:03 GMT-3
I have one in the lab and it works well once you get it setup and set the right
spids, phonenumbers and switch type. Getting there can be a pain.
With my Teleos I don't let anyone change the configuration once it is working.
There is no such thing as a default switch type. You need to configure per
BRI or PRI port the switchtype, spids (if required) and phonenumbers.
You need to use configuration utility called NMC to do this.
So if you can get a copy of NMC and have a look at the per port
configurations
this will tell you the switchtype. The other thing I have found with the teleos
is that if you configure the phonenumbers for either 4 digit or 7 digit you may
have to have a 8 or 9 as the first digit to dial between ports. With my
setup I have
to dial 8 and then 4 digits for the phonenumber.
Kevin
At 09:56 AM 2/21/01 -0600, Mark Salmon wrote:
>Hi, I searched the archives and noticed that several people have
>expressed frustration with the Madge/Teleos switch. I have one in a lab
>I have access to and want to know if anyone know what the ISDN switch
>type is. IF it is NI-1 then did they get it to work using 01 at the end
>of the SPID. Thanks.
>
>--
>
>
>
>Mark Salmon
>Network Support Engineer - SBC OP HQ
>Cisco Systems Inc
>8735 W. Higgins Road Suite 300
>Chicago IL 60631
>Phone:773-695-8235
>Pager:800-365-4578
>email: masalmon@cisco.com
>Empowering The Internet Generation.
>
>
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:28:55 GMT-3