From: Gabriel.Neagoe@xxxxxx
Date: Wed Feb 21 2001 - 09:44:25 GMT-3
How about that:
Wide-Area Networking
CSCdk87666
When two routers (Router A and Router B) have been configured to
asynchronously dial each other using static dialer maps
(using the encapsulation ppp and ppp authentication chap =
commands),
Router A dials Router B and connects. PPP
negotiates with no problem and the IP routes are installed. Router =
A
pings Router B but fails. The debug IP packet on Router A
shows that packets were sent. The debug IP packet on Router B =
shows
"encapsulation failed."=20
There is no known workaround.
=20
http://www.cisco.com/univercd/cc/td/doc/product/software/ios113ed/ios113=
p/11
3tcavs.htm
-----------------------------------------------
Gabriel Neagoe, GN379-RIPE
Networking solutions consultant
Cisco Certified Network Professional
Cisco Certified Design Associate
S&T Romania
tel: +401 20 40 300
fax: +401 20 40 310
-----------------------------------------------
> -----Original Message-----
> From: Arthayuth.B@datacraft-asia.com =
[SMTP:Arthayuth.B@datacraft-asia.com]
> Sent: Wednesday, February 21, 2001 2:34 PM
> To: Gabriel.Neagoe@snt.ro; ccielab@groupstudy.com
> Subject: RE: dialup makes me crazy
>=20
> could you put your command ? some thing wrong on your config
>=20
> > -----=A2=E9=CD=A4=C7=D2=C1=B5=E9=B9=A9=BA=D1=BA-----
> > =A8=D2=A1: Gabriel.Neagoe@snt.ro [SMTP:Gabriel.Neagoe@snt.ro]
> > =CA=E8=A7=E0=C1=D7=E8=CD: 21 =A1=D8=C1=C0=D2=BE=D1=B9=B8=EC 2544 =
19:23
> > =B6=D6=A7: ccielab@groupstudy.com
> > =E0=C3=D7=E8=CD=A7: dialup makes me crazy
> >=20
> >=20
> > hello everybody,
> >=20
> > i have a simple DDR setup between 2 routers and I managed to make =
ppp
> work
> > but
> > doing a ping (and a debug ip pack detail) i get
> >=20
> > ip s=3D1.1.1.2, d=3D1.1.1.1 len 100 ICMP type 8 ....
> > ip s=3D1.1.1.1, d=3D1.1.1.2 len 100 encapsulation failed
> >=20
> > what can be the reason for the "encapsulations failed" message ?
> >=20
> > -----------------------------------------------
> > Gabriel Neagoe, GN379-RIPE
> > Networking solutions consultant
> > Cisco Certified Network Professional
> > Cisco Certified Design Associate
> > S&T Romania
> > tel: +401 20 40 300
> > fax: +401 20 40 310
> > -----------------------------------------------
> >=20
> >=20
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:28:55 GMT-3