From: michheal david (michael302au@xxxxxxxxxxxx)
Date: Wed Feb 21 2001 - 05:23:29 GMT-3
Thanks
actually,i want to know how to config isdn caller id
callback.
server:(Legacy)
int bri0
isdn caller XXXXXXX callback
client:(Legacy)
int bri 0
isdn caller XXXXXXX
--- Bernard Dunn <dunn@cisco.com> wrote: > Sylvian,
>
> I've got this one for some reference:
>
> limno --( )-- stego
> \______ISDN__/
>
> ==============================
>
>
> hostname Stego
> !
> username Limno password 0 cisco
> ip subnet-zero
> no ip finger
> !
> isdn switch-type basic-ts013
> !
> interface Loopback0
> ip address 150.100.1.4 255.255.255.0
> !
> interface Loopback1
> ip address 150.100.20.1 255.255.255.0
> ip ospf network point-to-point
> !
> interface Serial0
> bandwidth 64
> no ip address
> encapsulation frame-relay
> no fair-queue
> clockrate 64000
> frame-relay interface-dlci 201 switched
> class 64k
> frame-relay intf-type dce
> frame-relay policing
> !
> interface Serial1
> bandwidth 2000
> no ip address
> encapsulation frame-relay
> no fair-queue
> clockrate 2000000
> frame-relay intf-type dce
> frame-relay policing
> frame-relay congestion-management
> threshold ecn bc 15
> threshold ecn be 0
> threshold de 30
> !
> interface Serial2
> bandwidth 64
> no ip address
> encapsulation frame-relay
> no fair-queue
> clockrate 64000
> frame-relay intf-type dce
> frame-relay policing
> !
> interface TokenRing0
> ip address 150.100.17.4 255.255.255.0
> ring-speed 16
> source-bridge 3 1 404
> source-bridge spanning
> !
> interface BRI0
> no ip address
> encapsulation ppp
> dialer pool-member 1
> isdn switch-type basic-ts013
> isdn calling-number 0294595100
> !
> interface Dialer1
> bandwidth 64
> ip address 150.100.19.2 255.255.255.0
> encapsulation ppp
> ip ospf demand-circuit
> dialer pool 1
> dialer remote-name Limno
> dialer idle-timeout 300
> dialer string 0293551270
> dialer-group 1
> dialer callback request
> ppp authentication chap
> !
> router ospf 1
> no log-adjacency-changes
> area 2 stub
> network 150.100.17.0 0.0.0.255 area 2
> network 150.100.19.2 0.0.0.0 area 2
> network 150.100.20.1 0.0.0.0 area 2
> !
> ip classless
> ip route 0.0.0.0 0.0.0.0 150.100.19.1 190
> no ip http server
> !
> !
> access-list 101 deny ospf any any
> access-list 101 permit ip any any
> dialer-list 1 protocol ip list 101
> !
>
> ==========================
>
> sh run
> Building configuration...
>
> Current configuration:
> !
> version 11.2
> !
> hostname Limno
> !
> enable secret 5 $1$5Al9$naxqovEmYYjYtagNG.D6Z.
> !
> username Stego password 0 cisco
> no ip domain-lookup
> isdn switch-type basic-ts013
> source-bridge ring-group 505
> !
> interface Loopback0
> ip address 150.100.1.2 255.255.255.0
> !
> interface Loopback1
> ip address 150.100.18.2 255.255.255.0
> !
> interface Serial0
> ip address 150.100.2.2 255.255.255.0
> ip pim sparse-dense-mode
> encapsulation frame-relay
> ip ospf network point-to-multipoint
> bandwidth 64
> load-interval 60
> no fair-queue
> frame-relay map ip 150.100.2.1 201 broadcast
> !
> interface Serial1
> no ip address
> shutdown
> !
> interface TokenRing0
> ip address 150.100.17.2 255.255.255.0
> ring-speed 16
> source-bridge 3 1 505
> source-bridge spanning
> !
> interface BRI0
> no ip address
> encapsulation ppp
> isdn calling-number 0293551270
> dialer pool-member 1
> !
> interface Dialer1
> ip address 150.100.19.1 255.255.255.0
> encapsulation ppp
> ip ospf demand-circuit
> bandwidth 64
> dialer remote-name Stego
> dialer idle-timeout 300
> dialer string 0294595100 class cb
> dialer pool 1
> dialer-group 1
> ppp callback accept
> ppp authentication chap
> !
> router ospf 1
> network 150.100.2.0 0.0.0.255 area 0
> network 150.100.17.0 0.0.0.255 area 2
> network 150.100.19.1 0.0.0.0 area 2
> area 2 stub no-summary
> area 2 range 150.100.16.0 255.255.240.0
> !
> ip classless
> ip pim rp-address 150.100.2.1
> !
> map-class dialer cb
> dialer callback-server username
> access-list 109 deny ospf any any
> access-list 109 permit ip any any
> !
> snmp-server community public RO
> dialer-list 1 protocol ip list 109
> dialer-list 1 protocol appletalk list 610
>
>
>
> On Tue, 20 Feb 2001, Sylvain Kouda wrote:
>
> >
> > Hi Bernard,
> >
> > I did a search with your name in the archives and
> I can't
> > find information about "dialer profile and ppp
> callback".
> > To recap, we know how to make the setup of "ppp
> callback"
> > with bri interface.
> > Once again if you can help , many thanks in
> advance.
> >
> > Sylvain.
>
=== message truncated ===
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:28:55 GMT-3