From: Steven Weber (itweber@xxxxxxxxxxx)
Date: Wed Feb 21 2001 - 00:09:20 GMT-3
See what you can make of this pings aren't going across either.
Thanks for your help,
Steve
r1#sh run
Building configuration...
Current configuration : 1655 bytes
!
version 12.1
service timestamps debug uptime
service timestamps log uptime
no service password-encryption
!
hostname r1
!
enable password cisco
!
!
!
!
!
ip subnet-zero
no ip finger
no ip domain-lookup
!
ipx routing 0000.0c76.3faf
cns event-service server
!
!
!
!
!
interface Loopback0
ip address 137.20.1.33 255.255.255.240
no ip route-cache
no ip mroute-cache
ipx network 11
!
interface Loopback1
ip address 137.20.1.17 255.255.255.240
no ip route-cache
no ip mroute-cache
ipx network 12
!
interface Loopback10
ip address 1.1.1.101 255.0.0.0
no ip route-cache
no ip mroute-cache
!
interface Ethernet0
ip address 137.20.10.1 255.255.255.0
no ip route-cache
no ip mroute-cache
no keepalive
ipx network 10
!
interface Serial0
no ip address
encapsulation frame-relay
no ip route-cache
no ip mroute-cache
!
interface Serial0.1 point-to-point
ip address 137.20.100.2 255.255.255.0
no ip route-cache
no ip mroute-cache
ipx network 102
frame-relay interface-dlci 102
!
interface Serial0.2 multipoint
ip address 137.20.101.1 255.255.255.0
no ip route-cache
no ip mroute-cache
ipx network 1235
frame-relay interface-dlci 103
frame-relay interface-dlci 105
!
interface Serial1
no ip address
no ip route-cache
no ip mroute-cache
shutdown
!
interface TokenRing0
no ip address
no ip route-cache
no ip mroute-cache
shutdown
!
ip classless
no ip http server
!
!
!
!
ipx router eigrp 1
network 1235
network 102
!
!
!
tftp-server flash c2500-ainr-l_112-18_P.bin
!
line con 0
exec-timeout 0 0
password san-fran
logging synchronous
transport input none
line aux 0
password cisco
line vty 0 4
password cisco
login
!
end
r1#
Current configuration:
!
version 11.2
no service password-encryption
no service udp-small-servers
no service tcp-small-servers
!
hostname r5
!
!
no ip domain-lookup
ipx routing 0010.7b36.630e
!
interface Ethernet0
ip address 137.20.50.1 255.255.255.0
no logging event subif-link-status
ipx network 567
!
interface Serial0
no ip address
encapsulation frame-relay
no logging event subif-link-status
--More--
%LINK-5-CHANGED: Interface Serial1, changed state to administratively down
%LINK-3-UPDOWN: Interface Serial0, changed state to up
%LINEPROTO-5-UPDOWN: Line protocol on Interface Serial0, changed state to up
%LINEPROTO-5-UPDOWN: Line protocol on Interface Serial0, changed state to down
%LINEPROTO-5-UPDOWN: Line protocol on Interface Serial0, changed state to up
!
interface Serial0.1 point-to-point
ip address 137.20.101.5 255.255.255.0
ip ospf network broadcast
ipx network 1235
frame-relay interface-dlci 501
!
interface Serial1
no ip address
no logging event subif-link-status
shutdown
!
interface BRI0
no ip address
no logging event subif-link-status
shutdown
!
router eigrp 1
redistribute ospf 1 metric 1544 10 255 1 1500
passive-interface Serial0
network 137.20.0.0
!
router ospf 1
summary-address 10.1.0.0 255.255.0.0
redistribute eigrp 1 metric-type 1 subnets
network 137.20.101.0 0.0.0.255 area 0
distribute-list 1 out
!
no ip classless
access-list 1 deny 192.168.1.0 0.0.254.255
access-list 1 permit any
access-list 1000 deny FFFFFFFF 7
access-list 1000 permit FFFFFFFF 0
!
!
ipx router eigrp 1
network 1235
!
!
!
tftp-server flash c2500-ainr-l_112-18_P.bin
!
line con 0
exec-timeout 0 0
logging synchronous
line aux 0
password cisco
line vty 0 4
password cisco
login
!
end
r5#
Chuck Larrieu wrote:
> If you supply some configs - specifically R1 and R5, we can probably help.
>
> FYI I completed this lab ( bootcamp lab 3 ) yesterday and had no issues with
> the static SAPs, other than a filtering problem that took a couple of
> minutes research to clear. If all your IPX routes are showing up everywhere,
> then these SAPs should also. My wild guess is that you don't have IPX /
> EIGRPO configured properly on the r1-r5 link.
>
> Chuck
>
> -----Original Message-----
> From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
> Steven Weber
> Sent: Tuesday, February 20, 2001 4:50 PM
> To: ccielab@groupstudy.com
> Subject: static sap's..
>
> R1 is the hub r2,r3,r5 are spokes. I've configured static sap's on r3.
> r1, r2, r3 come up with listings in sh ipx serv but r5 comes up
> blank.Any suggestions why.
> Thanks,
> Steve
>
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:28:55 GMT-3