From: Mario Gobeil (mgobeil@xxxxxxx)
Date: Tue Feb 20 2001 - 16:38:48 GMT-3
I have an Emutel Lite in my home lab and it works fine. Here is my config:
Hardware setup:
Coms Port Baud Rate 19200
Coms Port Parity None
Coms Port Stop Bits 2
Coms Port Data Bits 8
NT/Transparent Mode NT Mode
BRI1 Power On
BRI2 Power On
70V Power Operation Sealing
40V Power Operation Normal
S Bus Timing Fixed
Selected Tone 1000Hz @ 0dB
BRI1/B1 Delay 0 ms
BRI1/B2 Delay 0 ms
Software setup:
Network Type NT DMS100
Drop Layer 2 if No Call Active Yes
Drop Layer 1 if Layer 2 Inactive No
Drop TEI if Layer 1 Inactive No
Number of Data Links per Channel 2
Service Profile IDs (SPIDs) Mandatory
Allow Overlap Sending/Receiving No
Numbering System Option 2 DN/2 SPID (Fixed B)
Called Party Number Yes
Calling Party Number Yes
Called Party Subaddressing No
Calling Party Subaddressing No
Higher Level Compatibility No
Lower Level Compatibility No
D-Channel X25 Setup Yes
Terminal setup:
Terminal Type ANSI
Terminal Setup
Telephone number setup:
BRI1 - B1 Number : 1110001
BRI1 - B2 Number : 1110002
BRI2 - B1 Number : 2220001
BRI2 - B2 Number : 2220002
Telephone Number Setup
Busy Number : 384080
Unallocated Number : 384081
No User Responded Number : 384082
Call Rejected Number : 384083
Out of Order Number : 384084
Temporary Failure Number : 384085
No Answer Number : 384086
Test Tone Number : 384087
Loopback Number : 384060
I hope it will help.
Mario
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com]On Behalf Of
Dennis Laganiere
Sent: 19 février, 2001 15:13
To: 'ccielab@groupstudy.com'
Subject: EMUTEL LITE setup
I'm going to configuring my ISDN test bed this evening and I've got two
2503's, two NT1's and an EMUTEL LITE ISDN simulator. I think I've got the
routers set-up right, the NT1 seems to be just a plug in thing, but I'm not
looking forward to configuring this ISDN simulator. It looks like by
default the SPIDs are disabled, and there's probably a bunch of other
settings that need to be set properly. Can anybody save me several hours of
frustration by letting me share your experience in setting up this box? Let
me know...
--- Dennis
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:28:54 GMT-3